|
|
AVENGER T1F
Meets or exceeds the performance requirements of SAE 100R1AT, AS 3791 100R1AT, DIN 20022–1SN, EN 853 Type 1SN, ISO 1436 Types R1AT & 1SN.
Third Party approvals: MED (click to view).
|
|
Recommended For:
Use in Fire Suppression Systems of off-road vehicles, mining
equipment, stationary engines, etc.
The hose is coloured red, for easy identification as part of the
Fire Suppression System.
Tube:
Black, synthetic rubber (Nitrile). Resistant to aqueous film
forming foam, dry chemical powder, carbon dioxide, and
water based fire extinguishing agents.
Reinforcement:
One braid of high tensile steel wire.
Cover:
Red, heat resistant, abrasion resistant and oil resistant rubber.
Flame Resistant to Australian Standard AS 2660 and U.S.
MSHA requirements.
Highly visible layline branding for easy and permanent
identification.
No skiving required with T200 & T700 Series BITELOK Crimp
Couplings and K Series Field Attachable Couplings. |
Temperature Range:
From -40°C to +100°C (-40°F to +212°F).
Working Pressure:
Maximum working pressures are based on 4:1 safety factor (minimum burst to maximum working pressure).
Flame Resistance:
Complies with Flame Resistant requirements of Australian
Standard AS 2660 and Method of Test AS 1180.10B
Meets Flame Resistant Designation “U.S. MSHA” of the US
Department of Labor, Mine Safety and Health Administration.
Couplings:
BITELOK NON-SKIVE ONE-PIECE CRIMP
T200 Series (sizes -3 to -12) click to view
T700 Series (sizes -6 to -12) click to view
Assembly Instructions click to view
FIELD ATTACHABLE NON-SKIVE
K Series (sizes -4 to -12) click to view
Assembly instructions click to view
|
|
| PART NO | HOSE SIZE ID | MAX. DYNAMIC
WORKING PRESSURE | MIN.
BURST PRESSURE |
| | DN | INCH | DASH | BAR | PSI | BAR | PSI |
T13F | 5 | 3/16 | -03 | 250 | 3600 | 1000 | 14500 |
T14F | 6 | 1/4 | -04 | 225 | 3250 | 900 | 13000 |
T16F | 10 | 3/8 | -06 | 180 | 2600 | 720 | 10400 |
T18F | 12 | 1/2 | -08 | 160 | 2300 | 640 | 9200 |
T112F | 19 | 3/4 | -12 | 105 | 1500 | 420 | 6000 |
| PART NO | MINIMUM
BEND RADIUS | AVERAGE
WEIGHT | NOMINAL
HOSE OD | FIELD ATTACHABLE
K SERIES | BITELOK
ONE PIECE CRIMP |
| | MM | INCH | KGS/M | LBS/FT | MM | INCH | INSERT | FERRULE | NON-SKIVE |
T13F | 89 | 3.5 | 0,21 | 0.14 | 11,8 | 0.46 | | | T200 | |
T14F | 100 | 4.0 | 0,23 | 0.15 | 13,4 | 0.53 | 600 SERIES | K00-04 | T200 | |
T16F | 127 | 5.0 | 0,35 | 0.24 | 17,4 | 0.69 | 600 SERIES | K00-06 | T200 | T700 |
T18F | 178 | 7.0 | 0,43 | 0.29 | 20,5 | 0.81 | 600 SERIES | K00-08 | T200 | T700 |
T112F | 240 | 9.5 | 0,65 | 0.44 | 27,6 | 1.09 | 600 SERIES | K00-12 | T200 | T700 |
Contact RYCO Hydraulics for Crimp Diameter and Mark Length for BITELOK Couplings.
|
|
|