back  | print version  | PDF version
ASSEMBLY INSTRUCTIONS FOR:

RYCO FIELD ATTACHABLE COUPLINGS WITH RYCO SKIVE HOSE.
USE ONLY RYCO AS1D AND AS2D SERIES HOSE.
(USE ALSO ON LARGER SIZES OF RYCO T1A, T1D, T2A, T2D and RQP2 HOSE, SEE NOTE 1 & 2 PAGE 402).
  STEP ONE
  Cut hose to length required using a cut-off saw.
  Ensure hose is cut squarely.
  Clean hose bore.
  STEP TWO
  Mark Skive Length. (refer to Hose specification pages).
  Cut rubber cover around and down to wire reinforcement.
  Slit lengthwise.
  Raise flap and pull off with pliers.
  STEP THREE
  Lubricate exposed wire reinforcement.
  STEP FOUR
  Screw anti-clockwise until hose bottoms in ferrule.
  Ease back between 1/2 and 3/4 of a turn.
  STEP FIVE
  Liberally oil insert and inside of hose.
  STEP SIX
  Screw insert clockwise right into ferrule using a continuous motion.
  Do not allow hose to turn during operation.

 
All rights reserved ©Copyright RYCO Hydraulics 2002-2010