Couplings Explained

Couplings Explained

RYCO Couplings are designed and manufactured by people who know hydraulics.

We manufacture hose couplings in many different styles and sizes to match RYCO hose series, with a wide range of thread and connection types.

 

What is a Coupling?

A hose cannot be connected to a system like a hydraulic circuit without attaching a component, called a ‘coupling’, to each of its ends. When couplings are attached to the ends of a hose, it completes what is called a ‘hose assembly’.

Couplings have two ends, the ‘hose end’ and the ‘connector end’. For the connector end, there are many different ‘end styles’ to choose from so that hose assemblies can be uniquely configured for the application. Connector ends can be straight or have a 30, 45, 60, 90 or 135-degree configuration. They can also have one of the various connector styles such as JSEAL™, JIC, SAE, or BSPP to name just a few of the many.

 

Types of Couplings

Couplings are specifically matched to the hose type and series and can be one or two-pieces and are either crimped on, pushed on or field attachable.

 

One-Piece Crimp Couplings

RYCO - One Piece Crimp Couplings

Field Attachable Couplings

RYCO - Field Attachable Couplings

RYCO JSEAL™

RYCO - JSEAL™

Push On and Suction & Return Couplings

RYCO - Push On and Suction & Return Couplings

Considerations for Hose Assembly

Couplings have their own series designations and not every configuration and connector style is available for every coupling series and/or hose size. Hose couplings must be carefully matched to the hose. When the hose for an application has been selected, it is crucial that the couplings to eb.

When selecting couplings for building a hose assembly, there are specifications to consider such as:

  • Hose type
  • Hose series
  • Hose size
  • Coupling connector end style
  • Connector end style
  • Coupling series (that is matched to the hose)

 

Couplings Part Number

The coupling series, connector end style number, hose size it is matched to, and the connector end size are all readily identified in the coupling part number.

T2090-1216 is a coupling part number, and it has two halves.

The first half shows that the coupling series is T2000. The connector end style number is also in the first half and is 090 (090 will always mean NPT Male even in different series of couplings).

The second half of the coupling part number reflects two different measurements. The hose inside diameter measurement that this coupling will match is always the two numbers immediately following the dash or -12 in the example.

The connector end size is always the last two numbers in the part number or -16 in the example.

Want more information?

If you would like to know more about RYCO Couplings, contact our RYCO Hydraulics Customer Service Team or fill out our contact form.

How to Safely Operate Crimping Machines

How to Safely Operate Crimping Machines

The RYCO Crimper Series are compact and efficient swaging machines, equally suitable for repair shop applications and high-volume production of hose assemblies.

The RYCO Safety Zone provides an increased margin of operational safety when using RYCO matched hose and fittings. That’s why this article aims to inform you on the safe use of crimping machines.

Safety Zones

RYCO crimping machines present very minimal risk to operators. As with any machine, there is a potential of risk to an operator if due care is not shown.

To minimise the chances of injury, Safety Zones must be identified and implemented around the crimp dies. The Safety Zones incorporate two areas, an Exclusion Zone, and a Caution Zone.

RYCO Crimper Machines Safety Zone

The Exclusion Zones, (the red shaded areas), represent areas where there is a direct risk of a crushing injury to the operator. Hands, tools and other items must be kept well clear of these areas during operation of the crimping machine. Regardless of the crimping machine make, type or design, body parts or foreign objects MUST not contact the crimping dies or master dies.

The Caution Zone, (the yellow shaded area), represents an area where there is minimal potential of injury to the operator. However, a potential for injury is considered to exist due to the close proximity of this area to the Exclusion Zone. For this reason, it is recommended that hands are kept clear of the Caution Zone whenever possible. Operators hands may enter the Caution Zone once the risk of injury to the operator has been minimised.

Safe Operation

The majority of these machines incorporate a slow die movement with semi-automatic operation. Semi-automatic operation means that the dies will stop moving when the operator releases the “Die Close” button. This means that the operator is in complete control of the die movement.

The machine movement is considered to be controlled. Therefore, an operator may position his or her hand within the Caution Zone during operation, but only when:

  1. Total machine controllability has been established.
  2. The operator is fully alert and is not distracted in any way.
  3. The person positioning the assembly within the dies is the only person in control of the machine.
  4. The position of the operator’s hands are always fully visible to the operator.
Crimping Methods

Couplings MUST be crimped over the whole length of the ferrule including the nose crimp where the ferrule Is attached to the insert.

  1. Rear Insertion Method

Due to the necessity of correctly positioning the ferrule collar within the crimping dies, and the obvious importance of operator safety, one recommended method is inserting the hose from the rear of the machine.

This practice allows the position of the coupling ferrule nose crimp to be more easily viewed, whilst keeping the operator’s hands at a safe distance. The supporting hand must be outside of the Exclusion Zone at all times, and should be visible to the operator whenever practical.

RYCO Rear Insertion Crimping Method

  1. Front Insertion Method

A second assembly method is one where the hose is inserted from the front of the machine. This method ensures the safe placement of hands during the crimping operation, thereby reducing the risk of the operator placing his or her hands within the rear exclusion zone.

RYCO Front Insertion Crimping Method

IMPORTANT:

Extra care must be exercised when crimping with this method, as it can be more difficult to verify that the coupling is correctly positioned within the dies.

In some cases, straight end style couplings with small ends will allow the coupling to be safely crimped without an accurate prior positioning of the coupling within the crimp dies. In such cases, the ferrule can be crimped anywhere within the length of the dies, as long as the full ferrule is crimped in one operation.

RYCO Large Small End Styles

In these cases where the dimensions of the coupling end style negate the need for accurate coupling positioning within the crimping dies, the front insertion method is the preferred method.

Safety Warnings

Be aware of the published warnings stated explicitly on the crimping machine, in the corresponding crimping machine operating manual.

RYCO Crimper Machines Safety Warning

Maintenance & Calibration

Crimpers must be regularly inspected and maintained to ensure safe and effective operation. Any electrical works or repairs like changing seals or the pump must only be carried out by a qualified specialist.

Crimpers must also be regularly calibrated to ensure accurate and effective crimps. If the machine shows signs of erratic operation or unexpected movement, remove the machine from service immediately and consult the RYCO Technical support department.

Want more information?

If you would like to know more about operating your crimper, contact our RYCO Hydraulics Customer Service team or fill out our contact form.

RY16 1” Hose Mobile Crimper

RY16 1” Hose Mobile Crimper

When it comes to crimpers, the new RY16 1” Hose Mobile Crimper is simply the most versatile mobile crimper on the market! It’s compact size and light weight provides a portable and powerful experience.

Hydraulic hose crimpers (swagers) are used to permanently assemble crimp couplings onto a hydraulic hose. As a mobile operator, you need portable and reliable equipment to get this job done!

Here’s why more and more mobile operators are choosing the RY16 1” Hose Mobile Crimper.

  • Ease of Use – Operate from any 700 bar/10,000 psi power source.
  • Strength – The 120 ton crimping force provides expansive crimping capacity
  • Capacity – It has a 1 “ 4 wire crimp capacity.
  • Compact – Easily manoeuvred into tight spaces and makes those awkward jobs simple.
  • Portable – Weighing in at only 26kg (57.3lb) the RY16 is ultra-portable.
  • Protection – The versatile crimper comes equipped with a box to keep dies safe.

Mobile operators and mobile workshops need portable and reliable equipment to get the job done! The RYCO RY16 1” Hose Mobile Crimper provides an easy crimping experience in a compact design.

This crimper includes a tube of grease and brush to keep the machine lubricated and in full working order.

Accessories for this mobile crimper are available and include air/oil foot pump as well as an air hand pump.

Along with the new RY16, RYCO have a full range of crimpers including mobile, workshop and production series.

Want more information?

If you would like to know more about the most versatile mobile crimper on the market – RY16 1” Hose Mobile Crimper, contact your local RYCO Hydraulics Customer Service representative or fill out our contact form.

Crimpers & Crimping

Crimpers & Crimping

Hydraulic hose crimpers (also known as swagers or swaging presses) are used to permanently assemble crimp couplings onto a hydraulic hose.

Hydraulic operated crimping machines are generally quite simple in both design and construction.

The great majority of crimp heads are single acting hydraulic cylinders which open and close mechanical dies through various sliding faces.

These cylinders move in two directions, both forwards and backwards, but are usually only powered in the forward direction.

However, today crimpers have become an extremely well-engineered piece of equipment, which is critical to the safety of hydraulic hose and coupling assembly.

RYCO have a full range of crimpers including mobile, workshop and production series. All of which are efficient swaging machines, equally suitable for repair shop applications and high-volume production of hose assemblies.

Several of RYCO series crimpers are designed to handle large jobs with speed and efficiency. These full-scale production units offer:

  • High speed for increased productivity
  • Large die openings to allow small and large hose assemblies to pass through easily
  • A wide range of available die sets
  • High strength

A number of factors need to be considered when choosing the right crimper machine for you and your organisation. RYCO Hydraulics are able to assist in identifying the best model to suit your budget and needs.

Want More Information:

For help choosing the right crimping machine for your application, please contact one of our friendly RYCO Customer Service representatives or fill out our contact form for expert advice and guidance.