News & Events - Page 8 of 10 - RYCO Hydraulics
ELMORE FIELD DAYS, 4 – 6 October 2016

RYCO is proud to support McCullochs Hydraulic Engineers at the Elmore Field Days - Regional Victoria’s premier event.  This year at the Elmore Field Days, McCullochs will be displaying RYCO Hydraulic and Industrial products. McCullochs Engineering is not only RYCO’s largest Victorian distributor, they are also a RYCO 24•7 Mobile Connector Specialist with 3 vans operating in Bendigo and Shepparton. RYCO Hydraulics have supported McCullochs at the Elmore Field Days for over 20 years. Come and visit McCullochs and RYCO at stand 623, October 4 - 6 2016. ...

RYCO’s CEO presents Inaugural Speech at Penguin Engineers 25-Year Silver Jubilee

Leigh Morrison, RYCO’s Chief Executive Officer, was honoured to present the Inaugural speech at the Penguin Engineers 25-Year Silver Jubilee Celebrations. Penguin Engineers is a dynamic multi-faceted group engaged in providing engineering solutions in the fields of Textile, Packaging and Rubber Industries. Over the years Penguin Engineers have been integral to RYCO’s development and plant expansion including the delivery of new wrapping machines and caterpillars. RYCO are very happy and proud to be associated with the penguin family. Watch the video of Leigh Morrison’s Inaugural speech. ...

RYCO 24•7 to exhibit at the QUARRYNZ IOQ/AQA Annual Conference

Once a year the Aggregate & Quarry Association of NZ and the Institute of Quarrying NZ come together to put on the QUARRYNZ Conference. This year it will be held in Claudelands, Hamilton on 15 — 17 July 2015. RYCO 24-7 will be exhibiting at STAND 31 in HALL A. Take advantage of this opportunity to interact with fellow members of the quarrying industry, exchange ideas and forge the path for the future. We’ll see you there! ...

RYCO to showcase latest product advancements at the 2015 Asia-Pacific’s International Mining Exhibition

RYCO will be exhibiting at the 2015 AIMEX; one the largest mining events in the Asia-Pacific region. This year’s event will be held at Sydney Showgrounds, Sydney, Australia on 1st — 4th of September 2015. The show will offer unrivalled sales, marketing and networking opportunities and a chance to obtain vital information on the latest mining equipment, technology and services. RYCO will be showcasing some of its latest product innovations including JSEAL™, the CROCSTOP System, CROCBITE and QRAM — RYCO’s Asset Management System. Come and visit us at Stand 0212 to learn more about RYCO’s product range. ...

New RYCO Crimp Charts are now available online

This crimp chart supersedes all previous metric crimp chart versions and previously issued documentation regarding crimping dimensions. RYCO Rapid Numbers simplify the crimping process while reducing the risk of incorrectly fabricating a hose assembly due to operator error. RYCO Rapid Numbers should be used in conjunction with the corresponding crimper die colour specified herein for the corresponding hose and coupling combination. RYCO Rapid Numbers should only be used with RYCO R125 and R250 model crimpers in accordance with the respective crimper instruction documentation. Should the specified crimp dimension not be achieved using the corresponding RYCO Rapid Number setting, please contact RYCO Technical Department. Crimp dimensions should always be measured and checked using preferred methods outlined herein and as per associated RYCO literature. If a hose and coupling combination listed herein does not list assembly values in the crimp chart matrix, then that hose and coupling combination is an incompatible combination. Should you wish to confirm if a hose and coupling combination is valid, please check the latest version of this crimp chart at www.ryco.com.au or contact your nearest RYCO representative. ...

RYCO exhibits latest innovations at the 2015 Longwall USA Exhibition & Conference

Held on June 16-18 2015, Longwall USA is North America's only conference and trade show focused specifically on Longwall mining. Longwall USA is 3 days of education, product sourcing and networking with others who face similar challenges and opportunities. RYCO, a proud sponsor of the 2015 Longwall USA Exhibition & Conference, showcased our latest and greatest products, which enthralled attendees. We thank all who came and supported us throughout this 3-day event. ...

RYCO Hydraulics to exhibit at 2015 Global Petroleum Show June 9 – 11

RYCO Hydraulics will be exhibiting at the 2015 Global Petroleum Show. This prestigious event is an extensive showcase of technology driving the industry, featuring rigs, drives, casings, muds, fracturing and perforating, downhole, measurements and more.  The show takes place from June 9th – 11th 2015 at Stampede Park 1410 Olympic Way SE, Calgary, AB T2G 2W1 in Calgary, Alberta, Canada. If you are attending the show, please visit us in Halls D, E - stand 7532 Click here to read more. ...

See the Ute meet the Driver Day at RYCO 24•7 Ingleburn and RYCO 24•7 Mascot

On Wednesday the 3rd of December Gerard “Maverick” McLeod made himself and his V8 Ute available to the RYCO 24•7 Service centres in Sydney to meet with customers and staff. Gerard gave everyone a bit of insight in to how and what it takes to run a Ute in this highly competitive class of motor racing. Many attendees were surprised at the amount of physical and financial commitments these guys make to this class of incredibly close racing as well as what it takes to create the spectacle it is and that is why it is such a firm favourite with the fans. We would like to thank Gerard for his efforts this year, both on and off the track to help us in our drive to gain exposure and brand recognition for RYCO 24•7 . Thanks again Gerard ...

McLeod charges to finish in 2014

The Macmahon Racing team has endured a tough finish to the 2014 V8ute championship on the streets of Sydney’s Homebush Olympic Park but has come away with a list of positives to be proud of after its third season of racing. The weekend (5 – 7 December 2014) started fantastically for the team with consistent top 10 speed from the MAC UTE during Friday’s two 20-minute practice sessions leaving the team very confident leading into Saturday’s (6 December 2014) qualifying session. Saturday morning brought the ever important qualifying session and McLeod was instantly to the top of the time sheets in 4th overall. After a quick pit-stop to adjust tyre pressures McLeod tried to better his pervious time but was unable to after catching slower traffic ending the session in 10th overall only 0.9secs off pole position. Sunday’s Race 2 saw McLeod start in 29th position quickly making up 9 positions on the opening lap. The race was cut short due to a safety car period but McLeod was able to end the race in 13th overall passing and incredible 16 utes in ...