RTH1 – One Wire Braid 800-2450 psi Hose Teflon® Cover

Type Approvals:

Type Approvals

Technical Specifications:

Recommended For

High pressure hydraulic oil lines. Fluids at extremes of pressure and temperature. RYCO RTH1 Series Hose Lining is chemically pure, inert and contains no leachable additives. RYCO RTH1 is remarkably resistant to high temperature and flame. It has a very high melting point, thermal degradation threshold and auto-ignition temperature. Warning: RTH1 Hose Liner is non-conductive. Do not use with high velocity fluids and gases, as static electricity may be generated and cause premature failure of hose. If in doubt contact RYCO Hydraulics technical department.

Construction

TUBE: TEFLON® (PTFE).

REINFORCEMENT: One braid of high tensile Grade 304 stainless steel wire.

COVER: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.

Performance

TEMPERATURE RANGE: From -60°C to +260°C (-76°F to +500°F). (According to application). For water, emulsions etc. see page 58.

WORKING TEMPERATURE		% OF WORKING PRESSURE THAT MAY BE USED SAFELY
ºC	ºF	Percentage
-60°C to +100°C	(-76°F to +212°F)	100
-60°C to +100°C	(-76°F to +212°F)	100
-60°C to +100°C	(-76°F to +212°F)	100
-60°C to +100°C	(-76°F to +212°F)	100
-60°C to +100°C	(-76°F to +212°F)	100

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

RTH1 – TEFLON* HOSE			MATCHED COUPLINGS SERIES
PART NO	HOSE SIZE		ONE PIECE
HOSE	DN	DASH	NON-SKIVE
RTH14	6	-04	TT000
RTH16	10	-06	TT000
RTH18	12	-08	TT000
RTH110	16	-10	TT000
RTH112	19	-12	TT000
RTH116	25	-16	TT000

Content missing

RTH1 – One Wire Braid 800-2450 psi Hose Teflon® Cover

Type Approvals:

Technical Specifications: