TP7 SPIDERLINE – One-Two Synthetic Braid 1000-3000 psi Thermoplastic Hose

Technical Specifications:

Recommended For
High pressure hydraulic oil lines; pilot lines; greasing and lubrication lines; and some pneumatic and water lines. Suitable for use with mineral, vegetable and most ester based hydraulic fluids. Suitable for use with some gases, fluids and chemicals. Cover is perforated (pin-pricked) for use with air and gases.

RYCO SPIDERLINE hose is lighter weight, has a more compact outside diameter and is less than half the minimum bend radius of wire braided rubber hose. Smooth inner tube for high flow rate; and smooth, easily cleaned cover. The synthetic and aramid fibre reinforcement gives SPIDERLINE hose excellent corrosion and fatigue resistance plus low elongation at maximum dynamic working pressure.

Construction
TUBE: White, oil resistant seamless thermoplastic (Polyester).

REINFORCEMENT: One or two braids of synthetic fibre.

COVER: Black, oil and abrasion resistant thermoplastic (Polyurethane). Cover is perforated (pin-pricked).

Performance
Meets or Exceeds the Performance Requirements of:
AS 3791 100R7, EN 855 TYPE R7, ISO 3949, SAE 100R7.

TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F). Air & Water +70 ˚C (+158 ˚F). For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

Read More
TP7 – SPIDERLINE HOSE MATCHED COUPLINGS SERIES
PART NO HOSE SIZE ONE PIECE
HOSE DN DASH NON-SKIVE
TP73 5 -03 TP000
TP74 6 -04 TP000
TP75 8 -05 TP000
TP76 10 -06 TP000
TP78 12 -08 TP000
TP712 19 -12 TP000
TP716 25 -16 TP000

Content missing

WordPress Image Lightbox Plugin