TP7T SPIDERLINE – One-Two Synthetic Braid 2000-3000 psi Thermoplastic Twin Hose

Technical Specifications:

Recommended For
RYCO TP7T SPIDERLINE TWIN Hose consists of two TP7 Series Hoses of the same size, permanently joined together in a flat compact form that can be easily reeled onto payout and return reels on forklifts and cranes. It is also used on dispensing equipment and other applications requiring two hoses.

High pressure hydraulic oil lines; pilot lines; greasing and lubrication lines; and some pneumatic and water lines. Suitable for use with mineral, vegetable and most ester based hydraulic fluids. Suitable for use with some gases, fluids and chemicals. Cover is perforated (pin-pricked) for use with air and gases.

RYCO SPIDERLINE hose is lighter weight, has a more compact outside diameter and is less than half the minimum bend radius of wire braided rubber hose. Smooth inner tube for high flow rate; and smooth, easily cleaned cover.

The synthetic and aramid fibre reinforcement gives SPIDERLINE hose excellent corrosion and fatigue resistance plus low elongation at maximum dynamic working pressure.

Construction
TUBE: White, oil resistant seamless thermoplastic (Polyester).

REINFORCEMENT: One or two braids of synthetic fibre.

COVER: Black, oil and abrasion resistant thermoplastic (Polyurethane). Cover is perforated (pin-pricked).

Performance
TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F). Air & Water +70 ˚C (+158 ˚F). For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

Read More

TP7T SPIDERLINE – One-Two Synthetic Braid 2000-3000 psi Thermoplastic Twin Hose

TP7T – SPIDERLINE TWIN HOSE MATCHED COUPLINGS SERIES
PART NO HOSE SIZE ONE PIECE
HOSE DN DASH NON-SKIVE
TP74T 6 -04 TP000
TP75T 8 -05 TP000
TP76T 10 -06 TP000
TP78T 12 -08 TP000

Content missing