TP8N ISOLATOR – One-Two Synthetic Braid 3500-5000 psi Thermoplastic Non Conductive Hose

Technical Specifications:

Recommended For
Hydraulic oil lines where electrical non-conductivity is required (for use in applications where there is potential for contact with high voltage sources). Suitable for use with mineral, vegetable and most ester based hydraulic fluids. Heat and hydrolysis stabilised for use with water based hydraulic fluids up to +70°C (+158°F). Smooth inner tube for high flow rate; and smooth, easily cleaned cover. The high strength, non-metallic reinforcement gives these hoses excellent corrosion and fatigue resistance, and low elongation of ±2% at maximum dynamic working pressure.
Construction
TUBE: White, oil resistant seamless thermoplastic (Polyester).

REINFORCEMENT: One or two braids of aramid fibre.

COVER: Orange, oil and abrasion resistant thermoplastic (Polyurethane). Cover is non-perforated.

Performance
Meets or Exceeds the Performance Requirements of:
AS 3791 100R8, EN 855 TYPE R8, ISO 3949, SAE 100R8.

FEATURES: Meets non-conductivity requirements of SAE 100R7, AS 3791 100R7, EN 855 Type 7 (maximum leakage does not exceed 50 µA when subjected to 75 kV/305 mm or 250 kV/m for 5 minutes). Incorrect storage and use, particularly that leading to oil or moisture entering the reinforcement, may adversely affect electrical properties.

TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F). Air & Water +70 ˚C (+158 ˚F). For water, emulsions etc. see page 58.

WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

Read More
TP8N – ISOLATOR NON-CONDUCTIVE HOSE MATCHED COUPLINGS SERIES
PART NO HOSE SIZE ONE PIECE
HOSE DN DASH NON-SKIVE
TP84N 6 -04 TP000
TP86N 10 -06 TP000
TP88N 12 -08 TP000

Content missing

WordPress Image Lightbox Plugin