Page 9 - RYCO Crimper Brochure 2019
P. 9

    RYCO PRODUCTION SERIES
  RY65C
CRIMPS UP TO 2.1/2"
SUITABLE FOR HIGH VOLUME CRIMPING
RECOMMENDED FOR:
RYCO RY65C Series crimpers are designed to handle large jobs with speed and efficiency. This series is designed to crimp hose couplings up to 2.1/2” with a crimping force of 3,200 kN.
These full scale production units offer; high speed for increased productivity, large die openings to allow small and large hose assemblies to pass through easily, a wide range of available die sets, and high strength.
TECHNICAL DATA
• Hose is fed horizontally into the machine from front or rear. The horizontal attitude of the swage mechanism provides operators with the most ergonomic position for crimping, an important consideration especially when large 2" 4 wire assemblies are required.
• Crimping Die Sets are easily changed segment by segment using the forkhead hand tool, or the whole die set can be
changed in on operation using the optional Rapid Change Tool.
• Contact RYCO for capability to crimp each RYCO Coupling Series and size, and ability to accommodate Compact Elbow and Tube Bend couplings. Additional Die Sets can be purchased to crimp smaller and some larger hose sizes.
        DIE SETS
    RY32-07 7-10 0.276-0.394 55 2.16 ü
  RY32-10 10-12 0.394-0.472 55 2.16 ü
  RY32-12 12-14 0.472-0.551 55 2.16 ü
  RY32-14 14-16 0.551-0.630 55 2.16 ü
  RY32-16 16-19 0.630-0.748 55 2.16 ü
  RY32-19 19-22 0.748-0.866 55 2.16 ü
  RY32-22 22-26 0.866-1.024 55 2.16 ü
  RY32-26 26-30 1.024-1.181 55 2.16 ü
  RY32-30 30-34 1.181-1.339 75 2.95 ü
  RY32-34 34-39 1.339-1.535 75 2.95 ü
  RY32-39 39-45 1.535-1.772 75 2.95 ü
  RY32-45 45-51 1.772-2.008 90 3.55 ü
  RY32-51 51-57 2.008-2.244 90 3.55 ü
  RY32-57 57-63 2.244-2.480 120 4.72 ü
  RY32-63 63-69 2.480-2.717 120 4.72 ü
  RY32-69 69-74 2.717-2.913 120 4.72 ü
  RY32-74 74-80 2.913-3.150 120 4.72 ü
  RY32-78 78-87 3.071-3.425 120 4.72 ü
   CRIMPING DIE RANGE LENGTH
Die Set * mm inch mm inch Inc. Opt.
        RY32-QCT
ACCESSORIES
             Part No
Description
Quick Change Tool
#
Inc
Opt
      1
ü
      RY80-FP
Foot Pedal
1
ü
      RY32-BACKSTOP
Backstop Device
1
ü
      RY80-MIRROR
Rear Mirror with Brackets
1
ü
      CRIMPING CAPACITY**
    Hose Type
Nominal Capacity
    Spiral
 2” Multi Wire
   Braid
2.1/2”
  RY65C PRODUCTION - SPECIFICATIONS
 ELECTRICAL
  PHYSICAL - CRIMPER WITH BASE DIMENSIONS
PART NUMBER
 VOLTAGE
  PHASE
MOTOR POWER
  MACHINE CONTROL
 WIDTH
DEPTH
 HEIGHT
 WEIGHT1
                   kW
 hp
  mm
 inch
 mm
 inch
mm
  inch
kg
  lb
 RY65C-3-415
  415
  Three
   5.5
  7.4
 Digital
   860
  33.8
  1000
  39.3
 1600
   63
 1200
   2646
    RY65C PRODUCTION - TECHNICAL INFORMATION
    PART NUMBER
MAX. HOSE SIZE
CRIMPING RANGE DIAMETER
MAX. DIE TRAVEL
CRIMPING FORCE
             inch
mm
inch
mm
inch
kN
tons
         RY65C-3-415
2.1/2”
4-87
0.157-3.425
65
2.5
3200
360
            NOTE: *Other die sets available depending on country or application.
**Crimping capacity may vary based on coupling and hose design and may require multi stage crimping process to reach crimp diameter. 1Without oil
  RYCO CRIMPER RANGE 9
   7   8   9   10   11