Page 100 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE
BRAID
RECOMMENDED FOR:
High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS 3791 100R1AT, DIN 20022-1SN, EN 853 Type 1SN, ISO 1436 Types R1AT & 1SN, SAE 100R1AT.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS)
& MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings and K000 Series Field Attachable Couplings.
FEATURES:
The very high abrasion resistant properties of the cover, combined with the high working pressures and excellent impulse life, when tested to EN 853 Type 1SN/SAE 100R1AT test conditions, result in increased service life and minimise equipment downtime.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA, KR & MA-KA.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -03 to -32) pages 189 to 234. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -03 to -16) pages 252 to 273. K000 Series ferrule (sizes -03 to -16) page 355. Assembly Instructions page 478.
T1D
EXTRA ABRASION RESISTANT FRAS
ONE WIRE BRAID HOSE
T1D – DIEHARD NON-SKIVE HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
FIELD ATT
Hose DN Dash mm inch mm inch
bar psi bar psi mm inch kg/m lb/ft
NON-SKIVE
T2000 6000 (K000) T2000 6000 (K000) T2000 6000 (K000) T2000 6000 (K000) T2000
T13D
5
-03
4,8
3/16
11,7
0.46
250
3600
1000
14500
35
1.4
0,19
0.13
T2000
6000 (K000)
T14D 6 -04 T16D 10 -06 T110D 16 -10 T116D 25 -16 T124D 38 -24
6,6 1/4 9,8 3/8 16,2 5/8
25,4 1 38,1 1.1/2
13,3 0.52 17,3 0.68 23,6 0.93 35,5 1.40 50,2 1.98
225 3250 180 2600 130 1900 90 1300 50 725
900 13000
720 10400
520 7600
360 5200
200 2900 250
1.5 0,22 2.0 0,31 3.5 0,49 5.5 0,90 9.8 1,45
0.15 0.21 0.33 0.60 0.97
40 50 90 140
T15D
8
-05
8,2
5/16
14,9
0.59
215
3100
860
12400
50
2.0
0,25
0.17
T2000
T18D
12
-08
13,0
1/2
20,3
0.80
160
2300
640
9200
75
3.0
0,39
0.26
T2000
6000 (K000)
T112D
19
-12
19,1
3/4
27,6
1.09
105
1500
420
6000
110
4.3
0,62
0.42
T2000
6000 (K000)
T120D
31
-20
31,8
1.1/4
43,2
1.70
65
945
260
3780
210
8.3
1,21
0.81
T2000
T132D
51
-32
50,8
2
63,6
2.50
40
580
160
2320
315
12.4
2,09
1.40
T2000
*
When using A000 Series Field Attachable Couplings on T1D Series Hose, cover of hose must be skived at ends. Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
98
RYCO QUALITY