Page 102 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 102

 HOSE
BRAID
  T1F
FIRE SUPPRESSION ONE WIRE BRAID HOSE
     RECOMMENDED FOR
Use in Fire Suppression Systems of off-road vehicles, mining equipment, stationary engines, etc. The hose is coloured red, for easy identification as part of the Fire Suppression System.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS 3791 100R1AT, DIN 20022-1SN, EN 853 Type 1SN, ISO 1436 Types R1AT & 1SN, SAE 100R1AT.
TUBE:
Black, oil resistant synthetic rubber. Resistant to aqueous film forming foam, dry chemical powder, carbon dioxide, and water based fire extinguishing agents.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Red, heat resistant, abrasion resistant and oil resistant rubber. Flame Resistant to Australian Standard AS 2660 and U.S. MSHA requirements. Highly visible layline branding
for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings and K000 Series Field Attachable Couplings.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180.10B
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58..
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -03 to -16) pages 189 to 234. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -03 to -16) pages 252 to 273. K000 Series ferrule (sizes -03 to -16) page 355. Assembly Instructions page 478.
 T1F – FIRE SUPPRESSION NON-SKIVE HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
FIELD ATT
  Hose DN Dash mm inch
mm inch
13,3 0.52
17,3 0.68
23,6 0.93
bar psi bar psi mm inch kg/m lb/ft
NON-SKIVE
6000 (K000) 6000 (K000) 6000 (K000) 6000 (K000)
 T13F
5
-03
4,8
3/16
11,7
0.46
250
3600
1000
14500
90
3.5
0,19
0.13
 T2000
 6000 (K000)
 T14F 6 T16F 10 T110F 16
-04 6,6 -06 9,8 -10 16,2
1/4
3/8
5/8
225 3250 900
180 2600 720
130 1900 520
13000 100 10400 125 7600 200 5200 300
3.9 0,22 5.0 0,31 7.9 0,49 11.8 0,90
0.15 0.21 0.33 0.60
T2000 T2000 T2000 T2000
T15F
8
-05
8,2
5/16
14,9
0.59
215
3100
860
12400
115
4.5
0,25
0.17
T2000
T18F
12
-08
13,0
1/2
20,3
0.80
160
2300
640
9200
180
7.0
0,39
0.26
T2000
6000 (K000)
T112F
19
-12
19,1
3/4
27,6
1.09
105
1500
420
6000
240
9.5
0,62
0.41
T2000
6000 (K000)
T116F 25
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
-16 25,4
1
35,5 1.40
90 1300 360
       100 RYCO QUALITY
   100   101   102   103   104