Page 103 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

BRAID
T2D
EXTRA ABRASION RESISTANT FRAS
TWO WIRE BRAID HOSE
RECOMMENDED FOR:
High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS 3791 100R2AT, DIN 20022 - 2SN, EN 853 Type 2SN, ISO 1436 Types R2AT & 2SN, SAE 100R2AT.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two braids of high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 and T7000 Series Crimp Couplings and L000 Series Field Attachable Couplings.
FEATURES:
The very high abrasion resistant properties of the cover, combined with the high working pressures and excellent impulse life when tested to EN 853 Type 2SN/SAE 100R2AT test conditions result in, increased service life and minimise equipment downtime.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58..
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA, KR & MA-KA.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -48) pages 189 to 234. T7000 Series (sizes -06 to -32) pages 274 to 304. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -04 to -20) pages 252 to 273. L000 Series ferrule (sizes -04 to -20) page 355. Assembly Instructions page 478.
T2D – DIEHARD NON-SKIVE HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
FIELD ATT
Hose DN Dash mm inch
mm inch
16,4 0.65 21,7 0.86 28,9 1.15 47,2 1.87 66,8 2.63
91,3 3.59
bar psi bar psi mm inch kg/m lb/ft
NON-SKIVE
T7000 6000 (L000) T7000 6000 (L000) T7000 6000 (L000) T7000
T24D
6
-04
6,6
1/4
14,6
0.59
420
6100
1680
24400
100
3.9
0,35
0.24
T2000
6000 (L000)
T25D 8
-05 8,2 5/16
350 5100 350 5100 215 3100 140 2000 90 1300
70 1000
1400 20400
1400 20400
860 12400
560 8000
360 5200
280 4000
114 4.5
178 7.0
240 9.5
420 16.5
600 23.6
900 35.4
0,42 0.28 T2000
0,65 0.44 T2000
0,93 0.62 T2000
1,97 1.33 T2000
3,02 2.03 T2000
3,99 2.68 T2000
T26D
10
-06
9,8
3/8
18,5
0.74
350
5100
1400
20400
125
5.0
0,51
0.34
T2000
T7000
6000 (L000)
T28D T212D T220D T232D
T248D
12 -08 19 -12 31 -20 51 -32
76 -48
13,0 1/2 19,1 3/4 31,8 1.1/4 50,8 2 76,2 3
T210D
16
-10
16,2
5/8
24,9
0.99
250
3600
1000
14400
200
7.9
0,75
0.50
T2000
T7000
6000 (L000)
T216D
25
-16
25,4
1
37,3
1.48
175
2500
700
10000
300
11.8
1,30
0.87
T2000
T7000
6000 (L000)
T224D
38
-24
38,1
1.1/2
54,2
2.13
100
1450
400
5800
500
19.7
2,48
1.67
T2000
T7000
T240D
63
-40
63,5
2.1/2
80,1
3.15
70
1000
280
4000
760
29.9
3,70
2.49
T2000
- When using B000 Series Field Attachable Couplings on T2D Series Hose, cover of hose must be skived at ends. Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
CONNECTING PARTNERSHIPS 101
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION