Page 106 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 106

 HOSE
BRAID
 TXA2D
EXTRA ABRASION RESISTANT EXTRA HIGH PRESSURE
FRAS
TWO WIRE BRAID HOSE
      RECOMMENDED FOR:
High pressure hydraulic oil lines in applications where the outside cover of the hose is subjected to abrasion that may cause premature failure of standard hoses. Ideal for high pressure use that requires a smaller outside diameter (except -20 size), lighter weight, and more flexibility than spiral hose.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
AS 3791 100R2AT, BCS 174, DIN 20022-2SN, EN 853 Type 2SN, ISO 1436 Types R2AT & 2SN, SAE 100R2AT.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two braids of high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 & T7000 Series Crimp Couplings and L000 Series Field Attachable Couplings.
FEATURES:
The very high abrasion resistant properties of the cover, combined with the high working pressures and excellent impulse life, when tested to EN 853 Type 2SN/SAE 100R2AT test conditions, result in increased service life and minimise equipment downtime.
FLAME RESISTANCE:
Complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -08 to -16) pages 189 to 234. T7000 Series (sizes -08 to -16) pages 274 to 304. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -08 to -16) pages 252 to 273. L000 Series ferrule (sizes -08 to -16) page 355. Assembly Instructions page 478.
 TXA2D – DIEHARD AGGRESSOR NON-SKIVE HOSE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
PART NO
HOSE SIZE
ONE PIECE
FIELD ATT
  Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft
TXA210D 16 -10 16,2 5/8 25,2 0.99 350 5100 1400 20400 200 8.0 0,87 0.58
TXA216D 25 -16 25,4 1 37,7 1.48 225 3250 900 13000 300 12.0 1,50 1.01 Contact RYCO for Crimp Diameter and Mark Length for Couplings.
T2000 T2000
NON-SKIVE
T7000 6000 (L000) T7000 6000 (L000)
 TXA28D
12
-08
13,0
1/2
22,0
0.87
375
5440
1500
21760
178
7.0
0,72
0.48
T2000
T7000
 6000 (L000)
 TXA212D
19
-12
19,1
3/4
29,1
1.15
313
4530
1252
18120
240
9.5
1,11
0.75
T2000
T7000
6000 (L000)
      104
RYCO QUALITY











   104   105   106   107   108