Page 109 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 109

     SPIRAL
R4SPD
EXTRA HIGH PRESSURE FOUR SPIRAL HOSE
                                                                                            RECOMMENDED FOR:
Extra high pressure hydraulic oil lines.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: EN 856 Type 4SP, ISO 3862 Type 4SP.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Four alternating layers of spiralled high tensile steel wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Extra thin cover suitable for non-skive and skive couplings. Highly visible layline branding for easy and permanent identification. No skiving required with T7000 Series Crimp Couplings.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA, KR & MA-KA.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T7000 Series (sizes -06 to -16) pages 273 to 303. Assembly Instructions pages 478.
   R4SPD – DIEHARD SPIRAL HOSE
                        PART NO
 HOSE SIZE
    NOMINAL HOSE ID
   NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
 AVERAGE WEIGHT
 COUPLING SERIES
 ONE PIECE
                 Hose
  DN
 Dash
mm
  inch
 mm
 inch
 bar
 psi
 bar
psi
  mm
 inch
 kg/m
 lb/ft
 NON-SKIVE
 R4SP08D
  12
 -08
12,7
  1/2
 23,5
 0.93
 420
 6100
 1680
24400
  230
 9.1
 0,86
 0.58
 T7000
 R4SP10D
  16
 -10
15,9
  5/8
 27,0
 1.06
 380
 5500
 1520
22000
  250
 9.9
 1,10
 0.74
 T7000
 R4SP12D
  19
 -12
19,1
  3/4
 31,0
 1.22
 380
 5500
 1520
22000
  300
 11.8
 1,47
 0.99
 T7000
 R4SP16D
    25
   -16
  25,4
    1
   37,8
   1.49
   350
   5100
   1400
  20400
    340
   13.4
   1,95
   1.31
   T7000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
        HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE 107
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   107   108   109   110   111