Page 121 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 121

 RECOMMENDED FOR:
Water and air spray suited for dust control in all industrial and mining applications.
TUBE:
Black, oil resistant synthetic rubber. Cover is perforated (pin-pricked).
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Yellow, oil resistant and abrasion resistant synthetic rubber. No skiving required with T2000 Series Crimp Couplings.
MSHA - FLAME RESISTANCE:
Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180.10B.
Meets Flame Resistant Designation “U.S. MSHA” of
the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -08 to -32) pages 189 to 234. Assembly Instructions pages 480.
SPECIALTY AND HIGH TEMPERATURE
MS1000 MINESPRAY
         MS1000 – MINESPRAY HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
  Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE
 MS1008
12
-08
13,0
1/2
18,5
0.73
70
1000
280
4000
90
3.6
0,29
0.19
 T2000
 MS1010 16 -10 16,2 5/8 22,1 0.87 70 1000 280 4000 100 3.9 0,35 0.24 MS1016 25 -16 25,4 1 32,5 1.28 70 1000 280 4000 150 5.9 0,62 0.42 MS1024 38 -24 38,1 1.1/2 46,0 1.81 70 1000 280 4000 250 9.9 1,00 0.67
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
T2000 T2000 T2000
MS1012
19
-12
19,1
3/4
25,8
1.02
70
1000
280
4000
120
4.7
0,40
0.27
T2000
MS1020
31
-20
31,8
1.1/4
39,5
1.56
70
1000
280
4000
210
8.3
0,75
0.50
T2000
MS1032
  51
-32
50,8
2
59,1
2.33
70
1000
280
4000
300
11.8
1,42
0.95
T2000
    CONNECTING PARTNERSHIPS
119
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   119   120   121   122   123