Page 122 - 2019 RYCO Product Technical Manual V1-8
P. 122

HOSE
SPECIALTY AND HIGH TEMPERATURE
 BT1
ONE WIRE BRAID HOSE
                                                                       RECOMMENDED FOR:
Transportation, marine fuel and engine hose applications. Low pressure hydraulic oil return lines, general purpose water, glycol antifreeze solutions, biodiesel, diesel fuel, ethanol, gasoline/ petrol or air.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
SAE J1527 Type Class I, USCG SAE J1942, SAE J30R2 (non-marine). Meets SAE J30R2 performance requirements for non-marine applications and SAE J1527 Type Class I and USCG SAEJ1942 for marine applications.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Blue, oil resistant and abrasion resistant synthetic rubber.
MSHA - FLAME RESISTANCE:
Complies with Flame Resistant requirements of Australian Standard AS 2660 and Method of Test AS 1180.10B. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
TEMPERATURE RANGE:
   MEDIA
TEMP ˚C
   MIN
MAX
    Petroleum based hydraulic fluids
-40
+135
    Water, water/oil emulsion and water/glycol hydraulic fluids
—
80
    Engine oil, lubricating oils
-40
121
    Air
—
70
    Diesel, JP8
-20
100
    Biodiesel
-40
100
    Gasoline/petrol
-20
80
    Ethanol blends (15% max.ethanol)
-20
80
      THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, DOT, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 188 to 233. Assembly Instructions pages 478.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -04 to -16) pages 251 to 272. K000 Series ferrule (sizes -04 to -16) page 353. Assembly Instructions page 476.
BT1 – BIOTRANS HOSE
                       PART NO
  HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
 AVERAGE WEIGHT
 COUPLING SERIES
  ONE PC
FIELD ATT
           Hose
  DN
 Dash
 mm
inch
  mm
 inch
 bar
 psi
 bar
 psi
mm
  inch
 kg/m
 lb/ft
 NON-SKIVE
  BT14
   6
  -04
  6,6
 1/4
   13,3
  0.52
  50
  725
  200
  2900
 25
   1.0
  0,22
  0.15
  T2000
  6000 (K000)
 BT15
  8
 -05
 8,2
5/16
  14,9
 0.59
 50
 725
 200
 2900
30
  1.2
 0,25
 0.17
 T2000
  BT16
  10
 -06
 9,8
3/8
  17,3
 0.68
 50
 725
 200
 2900
35
  1.4
 0,31
 0.21
 T2000
 6000 (K000)
 BT18
  12
 -08
 13,0
1/2
  20,3
 0.80
 50
 725
 200
 2900
55
  2.2
 0,39
 0.26
 T2000
 6000 (K000)
 BT110
  16
 -10
 16,2
5/8
  23,6
 0.93
 50
 725
 200
 2900
70
  2.8
 0,49
 0.33
 T2000
 6000 (K000)
 BT112
  19
 -12
 19,1
3/4
  27,6
 1.09
 50
 725
 200
 2900
80
  3.2
 0,62
 0.41
 T2000
 6000 (K000)
                  BT116 25 -16 25,4 1 35,5 1.40 50 725 200 2900 105 4.1 0,90 0.60 T2000 6000 (K000)
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
          120 RYCO QUALITY
   120   121   122   123   124