Page 123 - 2019 RYCO Product Technical Manual V1-8
P. 123

      SW
VERY HIGH PRESSURE WATERBLAST
VERY HIGH PRESSURE WATERBLAST
                                   RECOMMENDED FOR:
Very High Pressure waterblast hose for the cleaning and preparation of marine surfaces, runway and swimming pool cleaning, and paint removal.
DO NOT USE with Steam.
TUBE:
Oil and water resistant synthetic rubber.
REINFORCEMENT:
Four alternating layers of spiralled high tensile steel wire.
COVER:
Oil, water and ozone resistant synthetic rubber. The cover is formulated to resist marking. Internal and External skiving required with TW4000 Series Interlok Crimp Couplings.
FEATURES:
Exceeds ISO 7751 performance requirements.
Meets specifications EN 1829-2 (impulse) and AS/NZS 4233.2. Highly abrasion resistant cover.
SW SHOCKWAVE - VERY HIGH PRESSURE HOSE
TEMPERATURE RANGE:
Continuous service from -20°C to +80°C (-4°F to +176°F). Intermittent service to +100°C (+212°F).
WORKING PRESSURE:
Maximum working pressures are based on 2.5:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
INTERLOK SKIVE ONE-PIECE CRIMP
TW4000 Series (Sizes -06 to -16) page 323. Assembly Instructions page 479
A MEMBER OF
THE WATERJET TECHNOLOGY ASSOCIATION (WJTA) AND INDUSTRIAL & MUNICIPAL CLEANING ASSOCIATION (IMCA)
THE AUSTRALASIAN HIGH PRESSURE WATER JETTING ASSOCIATION
                                                                                  COLOUR CODE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
INTERLOK ONE-PIECE
                 Hose
DN
Dash
mm
inch
mm
inch
bar
psi
bar
psi
mm
inch
kg/m
lb/ft INT/EXT SKIVE
0.37 TW4000 0.56 TW4000 0.62 TW4000 0.90 TW4000
                   SW18006
10
-06
9,5
3/8
21,5
0.85
1250
18125
3125
45315
150
5.9
0,56
                  SW16008
   SW14512
12
-08
-12
12,7
1/2
24,6
31,9
0.97
1100
16000
14500
2750
40000
36250
180
7.1
0,83
              19
19,0
3/4
1.26
1000
2500
220
8.7
0,92
                  SW10012
19
-12
19,0
3/4
30,6
1.21
700
10000
1750
25000
220
8.7
1,34
                SW10016 25 -16 25,4 1 37,6 1.48 700 10000 1750 25000 250 9.8 1,39   0.93
TW4000
  Cutting and Assembly Charges apply to all RYCO hoses, and vary by hose types and sizes. Contact RYCO for additional information or visit www.RYCO.com.au
  WJTA-IMCA colour code recommendations:
       20K Pressure Range
     15K Pressure Range
   10K Pressure Range
121 CONNECTING PARTNERSHIPS 121
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   121   122   123   124   125