Page 124 - RYCO Hydraulics Technical Manual 2019

HOSE
PRESSURE WASHER
JS4000/G
PRESSURE WASHER 280 BAR/4100 PSI
RECOMMENDED FOR:
Hot Water Pressure Washer Machines.
DO NOT USE with Steam.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: EN 1829-2.
TUBE:
Black, heat resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Oil resistant synthetic rubber formulated to resist marking.
JS4000, black, highly abrasion resistant (AR), non marking. JS4000G, grey, animal fat resistant (AFR), non marking.
Embossed layline for positive, permanent identification. No skiving required for T2000 Series Crimp Couplings.
TEMPERATURE RANGE:
JS4000/G JETSTORM Hoses handle hot water up to +135°C (+275°F) with intermittent service to +150°C (+302°F).
WORKING PRESSURE:
Maximum working pressures are based on 3:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -08) pages 187 to 232. Assembly Instructions pages 478.
A MEMBER OF
THE WATERJET TECHNOLOGY ASSOCIATION (WJTA) AND INDUSTRIAL & MUNICIPAL CLEANING ASSOCIATION (IMCA)
THE AUSTRALASIAN HIGH PRESSURE WATER JETTING ASSOCIATION
JS4000 JETSTORM - PRESSURE WASHER HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
Hose
DN
Dash
mm
inch
mm
inch
bar
psi
bar
psi
mm
inch
kg/m
lb/ft
NON-SKIVE
JS4004/G
6
-04
6,6
1/4
11,5
0.45
280
4100
840
12300
50
2.0
0,15
0.10
T2000
JS4005/G
8
-05
8,2
5/16
13,1
0.52
280
4100
840
12300
55
2.2
0,18
0.12
T2000
JS4006/G
10
-06
9,8
3/8
15,3
0.60
280
4100
840
12300
65
2.6
0,23
0.15
T2000
JS4008/G
12
-08
13,0
1/2
18,3
0.72
280
4100
840
12300
90
3.6
0,31
0.21
T2000
Cutting and Assembly Charges apply to all RYCO industrial hoses, and vary by hose types and sizes. Contact RYCO for additional information or visit www.RYCO.com.au
COUPLING SERIES ONE PIECE
122 RYCO QUALITY