Page 125 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 125

     PRESSURE WASHER
 JS4000BX/GX
PRESSURE WASHER 280 BAR/4100 PSI
                                            RECOMMENDED FOR:
Hot Water Pressure Washer Machines.
DO NOT USE with Steam.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: EN 1829-2.
TUBE:
Black, heat resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Oil resistant synthetic rubber formulated to resist marking
.JS4000BX, blue, highly abrasion resistant (AR), non marking JS4000GX, grey, highly abrasion resistant (AR), non marking.
Embossed layline for positive, permanent identification. No skiving required for T2000 Series Crimp Couplings.
TEMPERATURE RANGE:
JS4000BX/GX JETSTORM Hoses handle hot water up to +135°C (+275°F) with intermittent service to
+150°C (+302°F).
WORKING PRESSURE:
Maximum working pressures are based on 3:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -08) pages 188 to 233. Assembly Instructions pages 478.
A MEMBER OF
THE WATERJET TECHNOLOGY ASSOCIATION (WJTA) AND INDUSTRIAL & MUNICIPAL CLEANING ASSOCIATION (IMCA)
THE AUSTRALASIAN HIGH PRESSURE WATER JETTING ASSOCIATION
                 JS4000 JETSTORM - PRESSURE WASHER HOSE
                PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
                                 Hose
DN
Dash
mm
inch
mm
inch
bar
psi
bar
psi
mm
inch
kg/m
lb/ft
NON-SKIVE
                          JS4004BX
6
-04
6,6
1/4
12,6
0.50
280
4100
840
12300
50
2.0
0,18
0.12
T2000
                 JS4005BX
8
-05
8,2
5/16
14,2
0.56
280
4100
840
12300
55
2.2
0,22
0.15
T2000
                 JS4006BX
10
-06
9,8
3/8
16,4
0.65
280
4100
840
12300
65
2.6
0,26
0.17
T2000
                 JS4008BX
12
-08
13,0
1/2
19,4
0.76
280
4100
840
12300
90
3.6
0,36
0.24
T2000
                                         JS4004GX
6
-04
6,6
1/4
12,6
0.50
280
4100
840
12300
50
2.0
0,18
0.12
T2000
                 JS4005GX
8
-05
8,2
5/16
14,2
0.56
280
4100
840
12300
55
2.2
0,22
0.15
T2000
                 JS4006GX
10
-06
9,8
3/8
16,4
0.65
280
4100
840
12300
65
2.6
0,26
0.17
T2000
                 JS4008GX
12
-08
13,0
1/2
19,4
0.76
280
4100
840
12300
90
3.6
0,36
0.24
T2000
                                 Cutting and Assembly Charges apply to all RYCO industrial hoses, and vary by hose types and sizes. Contact RYCO for additional information or visit www.RYCO.com.au
    COUPLING SERIES ONE PIECE
         HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE 123
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   123   124   125   126   127