Page 126 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 126

 HOSE
PRESSURE WASHER
 JS4000/G PRESSURE WASHER
280 BAR/4100 PSI
   RECOMMENDED FOR:
Hot Water Pressure Washer Machines.
DO NOT USE with Steam.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: EN 1829-2.
TUBE:
Black, heat resistant synthetic rubber.
REINFORCEMENT:
One braid of high tensile steel wire.
COVER:
Oil resistant synthetic rubber formulated to resist marking.
JS4000, black, highly abrasion resistant (AR), non marking. JS4000G, grey, animal fat resistant (AFR), non marking.
Embossed layline for positive, permanent identification. No skiving required for T2000 Series Crimp Couplings.
TEMPERATURE RANGE:
JS4000/G JETSTORM Hoses handle hot water up to +135°C (+275°F) with intermittent service to +150°C (+302°F).
WORKING PRESSURE:
Maximum working pressures are based on 3:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -08) pages 189 to 234. Assembly Instructions pages 480.
A MEMBER OF
THE WATERJET TECHNOLOGY ASSOCIATION (WJTA) AND INDUSTRIAL & MUNICIPAL CLEANING ASSOCIATION (IMCA)
THE AUSTRALASIAN HIGH PRESSURE WATER JETTING ASSOCIATION
JS4000 JETSTORM - PRESSURE WASHER HOSE
 COUPLING SERIES ONE PIECE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
   Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE JS4005/G 8 -05 8,2 5/16 13,1 0.52 280 4100 840 12300 55 2.2 0,18 0.12 T2000
13,0
Cutting and Assembly Charges apply to all RYCO industrial hoses, and vary by hose types and sizes. Contact RYCO for additional information or visit www.RYCO.com.au
 JS4004/G
 6
 -04
6,6
1/4
11,5
0.45
280
4100
840
12300
50
2.0
0,15
0.10
 T2000
 JS4006/G
JS4008/G
10
12
-06
-08
9,8
3/8
1/2
15,3
18,3
0.60
0.72
280
280
4100
4100
840
840
12300
12300
65
90
2.6
 3.6
0,23
0,31
0.15
0.21
T2000
T2000
          124 RYCO QUALITY











   124   125   126   127   128