Page 132 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 132

 HOSE
TEFLON®
 RTH1 STAINLESS STEEL BRAID TEFLON* HOSE
      RECOMMENDED FOR:
High pressure hydraulic oil lines. Fluids at extremes of pressure and temperature. RYCO RTH1 Series Hose Lining is chemically pure, inert and contains no leachable additives. RYCO RTH1 is remarkably resistant to high temperature and flame. It has a very high melting point, thermal degradation threshold and auto-ignition temperature. Warning: RTH1 Hose Liner is non-conductive. Do not use with high velocity fluids and gases, as static electricity may be generated and cause premature failure of hose. If in doubt contact RYCO Hydraulics technical department.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: SAE 100R14. RTH112 meets ID and OD requirements of SAE 100R14. Other sizes have ID and OD different to SAE 100R14.
TUBE:
TEFLON® (PTFE).
REINFORCEMENT:
One braid of high tensile Grade 304 stainless steel wire.
TEMPERATURE RANGE:
From -60°C to +260°C (-76°F to +500°F). (According to application).
For water, emulsions etc. see page 58.
 WORKING TEMPERATURE
% OF WORKING PRESSURE THAT MAY BE USED SAFELY
 oC
+101°C to +150°C +201°C to +250°C
WORKING PRESSURE:
oF
Percentage
 -60°C to +100°C
(-76°F to +212°F)
100
(+214°F to +302°F) 93 (+394°F to +482°F) 77
+151°C to +200°C
(+304°F to +392°F)
85
+251°C to +260°C
 (+484°F to +500°F)
 70
 Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, DOT, GOST-R, BV, RINA and KR.
COUPLINGS:
ONE-PIECE CRIMP
TT000 Series (sizes -04 to -16) pages 319 to 322. Assembly instructions page 482.
RTH1 – TEFLON* HOSE
 COUPLING SERIES ONE PIECE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MAXIMUM WORKING PRESSURE SAE100R14
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
   Hose DN Dash mm inch mm inch bar psi bar psi bar psi mm inch kg/m lb/ft
RTH16 10 -06 9,5 3/8 11,7 0.46 165 2375 105 1500 660 9500 125 5.0 0,14 0.09
RTH110 16 -10 15,9 5/8 18,4 0.72 105 1500 56 800 420 6000 165 6.5 0,28 0.19
RTH116 25 -16 25,4 1 28,6 1.13 55 800 56 800 220 3200 300 12.0 0,46 0.31 DuPont Registered TM
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
TT000 TT000 TT000
 RTH14
6
-04
6,4
1/4
9,4
0.37
170
2450
105
1500
680
9800
75
3.0
0,12
0.08
 TT000
 RTH18
12
-08
12,7
1/2
15,4
0.61
120
1750
56
800
485
7000
140
5.5
0,22
0.15
TT000
RTH112
19
-12
19,1
3/4
22,1
0.87
85
1250
56
800
345
5000
200
8.0
0,33
0.22
TT000
    *
  130 RYCO QUALITY
   130   131   132   133   134