Page 133 - 2019 RYCO Product Technical Manual V1-8
P. 133

     TEXTILE BRAID
PL300
PUSH-ON HOSE
ONE TEXTILE BRAID HOSE
                                        RECOMMENDED FOR:
Petroleum base hydraulic oils, glycol antifreeze solutions, water, diesel fuels, and air.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One textile braid.
COVER:
Black, oil and abrasion resistant synthetic rubber.
TEMPERATURE RANGE:
Air: -40°C to +70°C (-40°F to +158°F) Water: -40°C to +85°C (-40°F to +185°F) Oil: -40°C to +95°C (-40°F to +203°F)
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety
factor (maximum working pressure to minimum burst pressure). PL300 Hose, and 8000 Series Push-On Fittings, are recommended for use in systems with Static Working Pressures (constant loads without pressure spikes) only. They are not recommended for vibration or pressure surge applications. PL300 Hose should not be used at both maximum working pressure and maximum
temperature simultaneously.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -12) pages 234 to 250. Assembly Instructions pages 478.
FIELD ATTACHABLE NON-SKIVE
8000 Series Push-On (sizes -04 to -16) pages 325 to 331. PL300 Hose simply pushes on to 8000 Series Couplings. For Diesel fuel and other potentially dangerous, or critical applications crimp fittings are required.
   PL300 PUSH ON HOSE
                             PART NO
 HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
  MAXIMUM STATIC WORKING PRESSURE
MINIMUM BURST PRESSURE
    MINIMUM BEND RADIUS
  VACUUM RATING
AVERAGE WEIGHT
 COUPLING SERIES
  ONE PC
PUSH ON
            Hose
  DN
 Dash
 mm
inch
  mm
inch
  bar
psi
  bar
psi
  mm
 inch
mmHg
  inHg
 kg/m
 lb/ft
 NON-SKIVE
  PL303
   6
  -04
  6,6
 1/4
   11,3
 0.44
   24
 350
   96
 1400
   65
  2.6
 710
   28
  0,09
  0.06
  T4000
  8000
 PL304
  8
 -05
 8,2
5/16
  13,0
0.51
  24
350
  96
1400
  75
 3.0
710
  28
 0,11
 0.07
 T4000
 8000
 PL305
  10
 -06
 9,8
3/8
  14,4
0.57
  24
350
  96
1400
  75
 3.0
635
  25
 0,13
 0.09
 T4000
 8000
 PL306
  12
 -08
 13,0
1/2
  17,8
0.70
  21
305
  84
1220
  100
 3.9
460
  18
 0,17
 0.11
 T4000
 8000
 PL308
  16
 -10
 16,2
5/8
  22,3
0.88
  21
305
  84
1220
  125
 4.9
380
  15
 0,26
 0.17
 T4000
 8000
 PL310
  19
 -12
 19,1
3/4
  25,5
1.00
  21
305
  84
1220
  150
 5.9
380
  15
 0,31
 0.21
 T4000
 8000
                  PL312 25 -16 25,4 1 31,0 1.22 14 205 56 820 200 7.8       0,34 0.23 T4000 8000
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
             HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE 131
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   131   132   133   134   135