Page 134 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE
TEXTILE BRAID
PL1D
EXTRA ABRASION RESISTANT FRAS
ONE TEXTILE BRAID HOSE PUSH ON HOSE
RECOMMENDED FOR:
Petroleum base hydraulic oils, glycol antifreeze solutions, water, diesel fuels, and air.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS 3791 100R6, DIN 20021-1TE, ISO 4079 Type R6, SAE 100R6.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One textile braid.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. No skiving required with T4000 Series Crimp Couplings.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM FRAS textile braided hose meets or exceeds
the Flame Resistance of U.S.A. MSHA Code of Federal Regulations Title 30 Part 18 Section 18.65 and the Anti-Static requirements of MDG 41, AS1180-13A and ISO 8031 having a resistance of less than 1MΩ per metre.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure). PL1D Hose, and 8000 Series Push-On Fittings, are recommended for use in systems with Static Working Pressures (constant loads without pressure spikes) only. They are not recommended for vibration or pressure
surge applications. PL1D Hose should not be used at both maximum working pressure and maximum temperature simultaneously.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -12) pages 235 to 251. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
8000 Series Push-On (sizes -04 to -12) pages 327 to 333. PL1D Hose simply pushes on to 8000 Series Couplings. For diesel fuel and other potentially dangerous, or critical applications crimp fittings are required.
PL1 D PUSH ON HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM STATIC WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
VACUUM RATING
AVERAGE WEIGHT
COUPLING SERIES
ONE PC
PUSH ON
Hose DN Dash mm inch mm inch bar psi bar psi mm inch mmHg inHg kg/m lb/ft NON-SKIVE
8 -05 8,2 5/16 14,3 0.56 30 435 120 1740 75 3.0 710 28 0,15 0.10 T4000 8000 12 -08 13,0 1/2 19,8 0.78 30 435 120 1740 90 3.5 460 18 0,23 0.15 T4000 8000 19 -12 19,1 3/4 26,4 1.04 22 320 88 1280 150 5.9 380 15 0,36 0.24 T4000 8000
PL14D
PL15D
PL16D
PL18D
PL110D
PL112D
6
-04
6,6
1/4
12,7
0.50
30
435
120
1740
65
2.6
710
28
0,12
0.08
T4000
8000
10
-06
9,8
3/8
15,9
0.63
30
435
120
1740
75
3.0
635
25
0,17
0.11
T4000
8000
16
-10
16,2
5/8
23,0
0.91
26
375
104
1500
125
4.9
380
15
0,29
0.19
T4000
8000
132 RYCO QUALITY