Page 135 - 2019 - PRODUCT TECHNICAL MANUAL - HYDRAULICS
P. 135

     TEXTILE BRAID
MP1
MULTI PURPOSE
ONE TEXTILE BRAID HOSE
                                       RECOMMENDED FOR:
Air, water, petroleum oils, kerosene and fuel oils.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: RMA (USA) Class A High Oil Resistance (tube),
RMA (USA) Class B Medium Oil Resistance (cover),
TUBE:
Black, oil resistant synthetic rubber. RMA (USA) Class A High Oil Resistance.
REINFORCEMENT:
One textile braid.
COVER:
Red, oil resistant and abrasion resistant synthetic rubber (Modified Nitrile). RMA (USA) Class B Medium Oil Resistance. No skiving required with T4000 Series Crimp Couplings.
FEATURES:
Tube non-conductive at 1000 volts DC. Meets electrical resistance of one megohm per inch when subjected to 1000 volts DC. Incorrect storage and use may adversely affect electrical properties.
TEMPERATURE RANGE:
Air, water, petroleum & lubricating oils: -40°C to +93°C (-40°F to +200°F). Petrol, kerosene, fuel oils: -40°C to +49°C (-40°F to +120°F). For continuous service at upper temperature limit, reduce maximum working pressure by 30%.
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure) , and are for the performance of the hose with RYCO T4000 Series BITELOK One-Piece couplings only. Maximum working pressure for a hose assembly with other couplings depends on the type of coupling and the type of clamp used. MP1 Hose should not be used at maximum working pressure and maximum working temperature simultaneously.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -20) pages 233 to 249. Assembly Instructions pages 478.
Standard industrial hose barbed tails with hose clamps may also be suitable depending on working pressure required.
Not suitable for use with RYCO 8000 Series Push-On couplings.
   MP1 – MULTI PURPOSE HOSE
                        PART NO
 HOSE SIZE
    NOMINAL HOSE ID
   NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
 AVERAGE WEIGHT
 COUPLING SERIES
 ONE PIECE
          Hose
  DN
 Dash
mm
  inch
 mm
 inch
 bar
 psi
 bar
psi
  mm
 inch
 kg/m
 lb/ft
 NON-SKIVE
  MP14
   6
  -04
 6,4
   1/4
  13,5
  0.53
  13,8
  200
  55,2
 800
   50
  2.0
  0,16
  0.11
  T4000
 MP16
  10
 -06
9,5
  3/8
 17,5
 0.69
 13,8
 200
 55,2
800
  70
 3.0
 0,24
 0.16
 T4000
 MP18
  12
 -08
12,7
  1/2
 21,4
 0.84
 13,8
 200
 55,2
800
  85
 4.0
 0,33
 0.22
 T4000
 MP110
  16
 -10
15,9
  5/8
 25,4
 1.00
 13,8
 200
 55,2
800
  105
 5.0
 0,43
 0.29
 T4000
 MP112
  19
 -12
19,1
  3/4
 28,6
 1.13
 13,8
 200
 55,2
800
  120
 5.0
 0,48
 0.32
 T4000
 MP116
  25
 -16
25,4
  1
 37,3
 1.47
 13,8
 200
 55,2
800
  155
 8.0
 0,82
 0.55
 T4000
 MP120
    31
   -20
  31,8
    1.1/4
   43,9
   1.73
   13,8
   200
   55,2
  800
    230
   10.0
   1,00
   0.68
   T4000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       CONNECTING PARTNERSHIPS 133
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   133   134   135   136   137