Page 136 - 2019 - PRODUCT TECHNICAL MANUAL - HYDRAULICS
P. 136

 HOSE
TEXTILE BRAID
 M2
TEXTILE
TWO TEXTILE BRAID HOSE
                                                                                RECOMMENDED FOR:
Medium pressure hydraulic oil lines, antifreeze solutions, water.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of:
AS 3791 100R3, DIN 20021-2TE, ISO 4079 Type R3, SAE 100R3.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two textile braids.
COVER:
Black, oil resistant and abrasion resistant synthetic rubber. No skiving required with T4000 Series Crimp Couplings and M000 Series Field Attachable Couplings.
MSHA - FLAME RESISTANCE:
Meets Flame Resistant Designation “U.S. MSHA” of
the US Department of Labor, Mine Safety and Health Administration. Complies with Flame Resistant requirements of Australian Standard AS 2660 and
Method of Test AS 1180.10B.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, DOT, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -12) pages 233 to 249. Assembly Instructions pages 478.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -04 to -12) pages 250 to 271. M000 Series ferrule (sizes -04 to -12) page 353. Assembly Instructions page 476.
M2 – TEXTILE BRAID
                        PART NO
  HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
 AVERAGE WEIGHT
 COUPLING SERIES
  ONE PC
FIELD ATT
           Hose
  DN
 Dash
 mm
inch
  mm
 inch
 bar
 psi
 bar
 psi
mm
  inch
 kg/m
 lb/ft
 NON-SKIVE
  M24
   6
  -04
  6,4
 1/4
   14,3
  0.56
  88
  1250
  350
  5000
 75
   3.0
  0,16
  0.11
  T4000
  6000 (M000)
 M25
  8
 -05
 7.9
5/16
            T4000
 6000 (M000)
 M26
  10
 -06
 9,5
3/8
  19,0
 0.75
 78
 1125
 312
 4500
100
  4.0
 0,28
 0.19
 T4000
 6000 (M000)
 M28
  12
 -08
 12,7
1/2
  23,8
 0.94
 70
 1000
 280
 4000
125
  5.0
 0,41
 0.28
 T4000
 6000 (M000)
                  M212 19 -12 19,1 3/4 31,7 1.25 52 750 210 3000 150 9.5 0,65 0.44 T4000 6000 (M000)
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
            134 HIGHER TECHNOLOGYRYECQOUAQLUSALGIRTEYATER PERFORMANCE
   134   135   136   137   138