Page 137 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

RECOMMENDED FOR:
Air, water, petroleum oils, kerosene and fuel oils.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: RMA (USA) Class A High Oil Resistance (tube),
RMA (USA) Class B Medium Oil Resistance (cover),
TUBE:
Black, oil resistant synthetic rubber. RMA (USA) Class A High Oil Resistance.
REINFORCEMENT:
One textile braid.
COVER:
Red, oil resistant and abrasion resistant synthetic rubber (Modified Nitrile). RMA (USA) Class B Medium Oil Resistance. No skiving required with T4000 Series Crimp Couplings.
FEATURES:
Tube non-conductive at 1000 volts DC. Meets electrical resistance of one megohm per inch when subjected to 1000 volts DC. Incorrect storage and use may adversely affect electrical properties.
TEMPERATURE RANGE:
Air, water, petroleum & lubricating oils: -40°C to +93°C (-40°F to +200°F). Petrol, kerosene, fuel oils: -40°C to +49°C (-40°F to +120°F). For continuous service at upper temperature limit, reduce maximum working pressure by 30%.
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure) , and are for the performance of the hose with RYCO T4000 Series One-Piece couplings only. Maximum working pressure for a hose assembly with other couplings depends on the type of coupling and the type of clamp used. MP1 Hose should not be used at maximum working pressure and maximum working temperature simultaneously.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -20) pages 235 to 251. Assembly Instructions pages 480.
Standard industrial hose barbed tails with hose clamps may also be suitable depending on working pressure required.
Not suitable for use with RYCO 8000 Series Push-On couplings.
TEXTILE BRAID
MP1
MULTI PURPOSE
ONE TEXTILE BRAID HOSE
MP1 – MULTI PURPOSE HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PIECE
Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE MP16 10 -06 9,5 3/8 17,5 0.69 13,8 200 55,2 800 70 3.0 0,24 0.16 T4000
MP14
6
-04
6,4
1/4
13,5
0.53
13,8
200
55,2
800
50
2.0
0,16
0.11
T4000
MP18
12
-08
12,7
1/2
21,4
0.84
13,8
200
55,2
800
85
4.0
0,33
0.22
T4000
MP110 16 -10 15,9 5/8 25,4 1.00 13,8 200 55,2 800 105 5.0 0,43 0.29 MP116 25 -16 25,4 1 37,3 1.47 13,8 200 55,2 800 155 8.0 0,82 0.55
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
T4000 T4000
MP112
19
-12
19,1
3/4
28,6
1.13
13,8
200
55,2
800
120
5.0
0,48
0.32
T4000
MP120
31
-20
31,8
1.1/4
43,9
1.73
13,8
200
55,2
800
230
10.0
1,00
0.68
T4000
CONNECTING PARTNERSHIPS
135
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION