Page 138 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 138

 HOSE
TEXTILE BRAID
 M2G
TWO TEXTILE BRAID HOSE LPG (CLASS C)
                                    IMPORTANT INFORMATION
RYCO M2G Series LPG Hose has Australian Gas Association approval (AGA approval No. 4247) only when used with RYCO T4000 Series One-Piece Non-Skive Crimp Couplings, or RYCO M000 Series Field Attachables.
AVAILABLE ONLY AS FACTORY FITTED HOSE ASSEMBLIES.
WARNING: Do not use Field Attachable Couplings for domestic applications. (This is a requirement of Australian Standard AS/NZS 1869).
For any queries, please contact RYCO Technical Department.
RECOMMENDED FOR:
Liquified Petroleum Gas and Natural Gas.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: AS/NZS 1869 Class C (2,6 MPa working pressure, +65°C/+149°F max. temperature).
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
Two textile braids.
COVER:
Black, abrasion resistant synthetic rubber. Pin-pricked (perforated). No skiving required with T4000 Series Crimp Couplings and M000 Series Field Attachable Couplings.
TEMPERATURE RANGE:
From -20°C to +65°C (-4°F to +149°F).
THIRD PARTY APPROVALS:
AUSTRALIAN GAS ASSOCIATION Approval No. 4247.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T4000 Series (Sizes -04 to -12) pages 234 to 250. Assembly Instructions pages 478.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (sizes -04 to -12) pages 251 to 272. M000 Series ferrule (sizes -04 to -12) page 353. Assembly Instructions page 476.
M2G – LPG HOSE
                        PART NO
  HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
 AVERAGE WEIGHT
 COUPLING SERIES
  ONE PC
FIELD ATT
           Hose
  DN
 Dash
 mm
inch
  mm
 inch
 bar
 psi
 bar
 psi
mm
  inch
 kg/m
 lb/ft
 NON-SKIVE
  M24G
   6
  -04
  6,4
 1/4
   14,3
  0.56
  2,6
  375
  10,4
  1500
 75
   3.0
  0,16
  0.11
  T4000
  6000 (M000)
 M26G
  10
 -06
 9,5
3/8
  19,0
 0.75
 2,6
 375
 10,4
 1500
100
  4.0
 0,28
 0.19
 T4000
 6000 (M000)
 M28G
  12
 -08
 12,7
1/2
  23,8
 0.94
 2,6
 375
 10,4
 1500
125
  5.0
 0,41
 0.28
 T4000
 6000 (M000)
 M212G
    19
   -12
   19,1
  3/4
    31,7
   1.25
   2,6
   375
   10,4
   1500
  240
    9.5
   0,65
   0.44
   T4000
   6000 (M000)
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
        136 RYCO QUALITY
   136   137   138   139   140