Page 150 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE
THERMOPLASTIC
TP3000 LOW TEMPERATURE R18 ISOBARIC HOSE
210 BAR / 3000 PSI
RECOMMENDED FOR:
Medium pressure hose suitable for petroleum or synthetic based hydraulic fluids in forklift systems. Optimum bonding characteristics and special cover also make it the ideal
hose for equipment operating in cold environments, while maintaining a high level of flexibility.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: SAE 100 R18.
TUBE:
Polyester elastomer.
REINFORCEMENT:
One or two braids of synthetic fibre.
COVER:
Special polyester, black with white ink-jet branding. Cover is perforated (pin-pricked).
FEATURES:
Special polyester cover resistant to low temperatures and harsh weather conditions. Optimum bonding between tube, braids and cover for tight bend radii without cover wrinkling.
TEMPERATURE RANGE:
From -55˚C to +100˚C (-67˚F to +212˚F) Air & Water +70 ˚C (+158 ˚F)
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
TP000 Series (sizes -04 to -16) pages 306 to 318. Assembly Instructions pages 480.
TP3000 – ISOBARIC THERMOPLASTIC HOSE
COUPLING SERIES ONE PIECE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE TP3006 10 -06 9,7 3/8 16,6 0.65 210 3000 840 12000 45 1.8 0,16 0.11 TP000
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
TP3004
6
-04
6,5
1/4
12,2
0.48
210
3000
840
12000
35
1.4
0,09
0.06
TP000
TP3008
12
-08
13,0
1/2
22,5
0.89
210
3000
840
12000
70
2.8
0,29
0.20
TP000
148 HIGHER TECHNOLOGYRYECQOUAQLUSALGIRTEYATER PERFORMANCE