Page 151 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 151

 GREASING AND LUBRICATION
TPGL THERMOPLASTIC HIGH PRESSURE GREASELINE HOSE
     RECOMMENDED FOR:
Thermoplastic constant pressure hose for high pressure greasing and lubrication systems.
TUBE:
White, oil resistant seamless thermoplastic polymer.
REINFORCEMENT:
One braid of synthetic fibre.
COVER:
Black, oil and abrasion resistant thermoplastic ploymer. Cover is non-perforated.
FEATURES:
Polyester reinforcement for high pressure.
Extremely compact and flexible, and highly kink resistant. Special low-friction smooth cover for easy installation and compact routing.
TEMPERATURE RANGE:
From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
TG000 Series (size -02) pages 323. Assembly Instructions pages 480.
FIELD ATTACHABLE NON-SKIVE
6000 SERIES insert (size -02) pages 357 to 387. P000 Series ferrule (size -02) page 355.
    TPGL – THERMOPLASTIC GREASELINE HOSE
PART NO
HOSE SIZE
NOMINAL HOSE ID
NOMINAL HOSE OD
MAXIMUM WORKING PRESSURE
MINIMUM BURST PRESSURE
MINIMUM BEND RADIUS
AVERAGE WEIGHT
COUPLING SERIES
ONE PC
FIELD ATT
  Hose DN Dash mm inch mm inch bar psi bar psi mm inch kg/m lb/ft NON-SKIVE
Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
 TPGL2
  4
-02
4,0
0.16
8,3
0.33
250
3600
1000
14400
25
0.98
0,05
0.03
 TG000
   6000 (P000)
     CONNECTING PARTNERSHIPS 149
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION












































   149   150   151   152   153