Page 156 - 2019 RYCO Product Technical Manual V1-8
P. 156

                                                                                    HOSE
HOSE PROTECTION – RCS CROCSLEEVE
    RCS
CROCSLEEVE
FLAME RESISTANT ANTI-STATIC
                                                                                                                              RECOMMENDED FOR:
Hose burst and pinhole protection. Protection of individual hoses from severe abrasion. Provides a cost effective method of bundling hoses together, while providing abrasion resistance to the bundle. When abrasion occurs, the thousands of tiny filaments in the sleeve bulk up, to continually renew the surface.
CONSTRUCTION:
Densely woven, polyamide tubular sleeve. Black or Red colour. CROCSLEEVE is not affected by exposure to air, water, hydraulic oil and many other fluids. The inside bore of the CROCSLEEVE is smooth, allowing hose to move inside the sleeve, and allowing easy installation.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
Flame Resistant and Anti-Static - FRAS. Electrical conductivity is 3 to 5 MΩ/m when subjected to 500 Volts DC.
TEMPERATURE RANGE:
From - 50°C to + 121°C (- 58°F to + 250°F).
SIZE SELECTION:
Choose a size that is slightly larger than the hose or hoses to be sleeved - recommended size is 50% larger than nominal Hose OD (see chart on page 152). If CROCSLEEVE is to be installed onto fitted hose assemblies, allow for the maximum outside profile of the hose fittings.
ASSEMBLY INSTRUCTIONS:
1. Cut the CROCSLEEVE to length.
2. The loose fibres of the cut edges can be sealed with a
heat gun or hot knife, to prevent fraying.
3. Install over hoses or hose assemblies.
4. Secure in place using adhesive-lined heat shrink tubing.
 RCS CROCSLEEVE SPECIFICATIONS
     RCSR-23
CROCSLEEVE DIMENSIONS
     PART NO
NOMINAL ID
NOMINAL FLAT ID
36
NOMINAL FLAT OD
NOMINAL WEIGHT
                Black
RED
A mm
A inch
B mm
B inch
C mm
C inch
kg/m
lb/ft
                     RCSB-20
RCSR-20
20
0.79
31
1.22
34
1.34
0,039
0.026
           RCSB-23
23
0.91
1.42
39
1.54
0,044
0.030
           RCSB-27
RCSR-27
27
1.06
42
1.65
45
1.77
0,052
0.035
           RCSB-31
RCSR-31
31
1.22
49
1.93
52
2.05
0,060
0.040
           RCSB-36
RCSR-36
36
1.42
54
2.13
57
2.24
0,065
0.044
           RCSB-44
RCSR-44
44
1.73
69
2.72
72
2.83
0,082
0.055
           RCSB-47
RCSR-47
47
1.85
74
2.91
77
3.03
0,086
0.058
           RCSB-55
RCSR-55
55
2.17
86
3.39
89
3.50
0,102
0.068
           RCSB-60
RCSR-60
60
2.36
94
3.70
97
3.82
0,111
0.074
           RCSB-66
RCSR-66
66
2.60
104
4.09
107
4.21
0,122
0.082
           RCSB-73
RCSR-73
73
2.87
115
4.53
118
4.65
0,135
0.091
           RCSB-93
RCSR-93
93
3.66
146
5.75
149
5.87
0,170
0.114
           RCSB-112
RCSR-112
112
4.41
176
6.93
179
7.05
0,206
0.138
           RCSB-129
RCSR-129
129
5.08
202
7.95
205
8.07
0,360
0.241
                        NOTE: In order to function as a burst diffuser, the RCS CROCSLEEVE size recommendations stated in this chart are approximately 50% larger than the corresponding Hose OD.
          MDG 41 SAFE
                                                 154 RYCO QUALITY
   154   155   156   157   158