Page 157 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE PROTECTION – RCS CROCSLEEVE
RCS CROCSLEEVE FLAME RESISTANT ANTI-STATIC
RECOMMENDED FOR:
Hose burst and pinhole protection. Protection of individual hoses from severe abrasion. Provides a cost effective method of bundling hoses together, while providing abrasion resistance to the bundle. When abrasion occurs, the thousands of tiny filaments in the sleeve bulk up, to continually renew the surface.
CONSTRUCTION:
Densely woven, polyamide tubular sleeve. Black or Red colour. CROCSLEEVE is not affected by exposure to air, water, hydraulic oil and many other fluids. The inside bore of the CROCSLEEVE is smooth, allowing hose to move inside the sleeve, and allowing easy installation.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
Flame Resistant and Anti-Static - FRAS. Electrical conductivity is 3 to 5 MΩ/m when subjected to 500 Volts DC.
RCS CROCSLEEVE SPECIFICATIONS
TEMPERATURE RANGE:
From - 50°C to + 121°C (- 58°F to + 250°F).
SIZE SELECTION:
Choose a size that is slightly larger than the hose or hoses to be sleeved - recommended size is 50% larger than nominal Hose OD (see chart on page 153). If CROCSLEEVE is to be installed onto fitted hose assemblies, allow for the maximum outside profile of the hose fittings.
ASSEMBLY INSTRUCTIONS:
1. Cut the CROCSLEEVE to length.
2. The loose fibres of the cut edges can be sealed with a
heat gun or hot knife, to prevent fraying.
3. Install over hoses or hose assemblies.
4. Secure in place using adhesive-lined heat shrink tubing.
kg/m lb/ft
0,044 0.030 0,060 0.040 0,082 0.055 0,102 0.068 0,122 0.082 0,170 0.114 0,360 0.241
CROCSLEEVE DIMENSIONS
PART NO
NOMINAL ID
NOMINAL FLAT ID
NOMINAL FLAT OD
NOMINAL WEIGHT
Black
RCSB-23 RCSR-23 RCSB-31 RCSR-31 RCSB-44 RCSR-44 RCSB-55 RCSR-55 RCSB-66 RCSR-66 RCSB-93 RCSR-93
RCSB-129 RCSR-129
RED
A mm
23 31 44 55 66 93
129
A inch
0.91 1.22 1.73 2.17 2.60 3.66
5.08
B mm
36 49 69 86 104 146
202
B inch
1.42 1.93 2.72 3.39 4.09 5.75
7.95
C mm
39 52 72 89 107 149 205
C inch
1.54 2.05 2.83 3.50 4.21 5.87 8.07
RCSB-20
RCSR-20
20
0.79
31
1.22
34
1.34
0,039
0.026
RCSB-27
RCSR-27
27
1.06
42
1.65
45
1.77
0,052
0.035
RCSB-36
RCSR-36
36
1.42
54
2.13
57
2.24
0,065
0.044
RCSB-47
RCSR-47
47
1.85
74
2.91
77
3.03
0,086
0.058
RCSB-60
RCSR-60
60
2.36
94
3.70
97
3.82
0,111
0.074
RCSB-73
RCSR-73
73
2.87
115
4.53
118
4.65
0,135
0.091
RCSB-112
RCSR-112
112
4.41
176
6.93
179
7.05
0,206
0.138
NOTE: In order to function as a burst diffuser, the RCS CROCSLEEVE size recommendations stated in this chart are approximately 50% larger than the corresponding Hose OD.
MDG 41 SAFE
CONNECTING PARTNERSHIPS 155
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION