Page 159 - 2019 RYCO Product Technical Manual V1-8
P. 159

      HOSE PROTECTION – RAWHIDE NYLON HOSE SLEEVE
RH
RAWHIDE
NYLON HOSE SLEEVE
                             RECOMMENDED FOR:
Protection of individual hoses from severe abrasion. Provides a cost effective method of bundling hoses together, while providing abrasion resistance to the bundle. When abrasion occurs, the thousands of tiny filaments in the sleeve bulk up, to continually renew the surface.
CONSTRUCTION:
Densely woven, multi-filament nylon, tubular sleeve.
Black colour. Nylon is not affected by exposure to air, water, hydraulic oil and many other fluids. The inside bore of the sleeve is smooth, allowing hose to move inside the sleeve, and allowing easy installation.
FLAME RESISTANCE:
Meets Flame Resistant Designation ”U.S. MSHA” of the U.S. Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
From - 50°C to + 121°C (- 58°F to + 250°F).
SIZE SELECTION:
Choose a size that is slightly larger than the hose or hoses to be sleeved (see chart on page 155).
If sleeve is to be installed onto fitted hose assemblies, allow for the maximum outside profile of the hose fittings.
ASSEMBLY INSTRUCTIONS:
1. Cut the Nylon Hose Sleeve to length.
2. The loose fibres of the cut edges can be sealed with a
heat gun or hot knife, to prevent fraying.
3. Install over hoses or hose assemblies.
4. Secure in place using cable ties, band clamps or
hose clamps.
STANDARD COIL LENGTHS:
91,4 metre (300 ft) long coils; or cut lengths.
     RH RAWHIDE SPECIFICATIONS
      A mm
RAWHIDE NYLON HOSE SLEEVE
    PART NO
NOMINAL ID
NOMINAL WALL THICKNESS
B mm
NOMINAL INSIDE FLAT DIMENSION
NOMINAL WEIGHT
              A inch
B inch
C mm
C inch
kg/m
lb/ft
                   RH-23
22,9
0.90
2,3
0.09
29,8
1.41
0,06
0.03
          RH-27
26,9
1.06
2,3
0.09
39,8
1.67
0,07
0.04
          RH-31
31,0
1.22
2,3
0.09
49,9
1.92
0,08
0.05
          RH-36
36,0
1.42
2,5
0.10
56,6
2.23
0,09
0.06
          RH-46
46,0
1.81
2,5
0.10
72,1
2.84
0,12
0.08
          RH-56
55,6
2.19
2,5
0.10
87,4
3.44
0,15
0.10
          RH-61
60,5
2.38
2,5
0.10
95,0
3.74
0,16
0.11
          RH-67
RH-73
66,8
2.63
2,5
2,5
0.10
104,6
4.12
0,17
0.12
          73,2
2.88
0.10
115,1
4.53
0,19
0.13
          RH-93
93,0
3.66
2,5
0.10
146,1
5.75
0,25
0.17
                NOTE: In order to function as a burst diffuser, the RCS CROCSLEEVE size recommendations stated in this chart are approximately 50% larger than the corresponding Hose OD.
CONNECTING PARTNERSHIPS 157
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   157   158   159   160   161