Page 161 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE PROTECTION – RSG/RSGY/SGF SPIRAL
RSG
POLYETHYLENE SPIRAL GUARD RSG (BLACK), RSGY (YELLOW), RSGF (FRAS)
RECOMMENDED FOR:
Lightweight, cost-effective protection of hoses and cables from abrasion and impact. It can also be used to bundle hoses together in groups. RSGF meets Flame Resistance Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
CONSTRUCTION:
Polyethylene plastic spiral, with rounded edges to protect hose cover. RSG Black; RSGY Yellow; RSGF FRAS (Dark Grey). Polyethylene is not affected by exposure to air, water, hydraulic oil and many other fluids.
TEMPERATURE RANGE:
From -40°C to +120°C (-40°F to +248°F).
ASSEMBLY INSTRUCTIONS:
RYCO Spiral Guard can easily be applied after hose assembly because of its spiral form. Place one end of completed hose assembly in a vice. Wrap coil onto hose. It is recommended to choose RYCO Spiral Guard size so that it is a tight fit on the hose.
This will keep the Spiral Guard in place on the hose. The Spiral Guard expands to fit the hose or hose bundle. Allow extra length of Spiral Guard to allow for this expansion.
SIZE SELECTION:
The tables below show RYCO Spiral Guard size selection for a tight fit on the hose. Due to the Spiral Guard expanding to fit the hose, extra length of Spiral Guard must be allowed. This extra length can be estimated as follows:
T26A Nominal OD = 18,9 mm (see chart on page 153) RSG-20L Nominal ID = 15,0 mm (from chart below) Estimated length of RSG-20L to cover 2,3 metres of T26A
= 18,9 x 2,3 m = 2,90 metres 15,0
HOW TO ORDER:
Complete the Part Number: RSG-16L, RSGY-75L, RSGF-50L etc.
SPIRAL GUARD
HOSE SERIES
Sizes -16L to -90L: Size -110L:
20 m (65.6 ft) coils or cut to length. 10 m (32.8 ft) coils or cut to length.
DASH SIZE
NOMINAL ID
NOMINAL OD
MM
INCH
MM
INCH
-12L
9,0
0.35
13,0
0.51
-4
-4
-4
-4
-4
-4
-4
-4
-4
-3, -4
-16L 12,0 0.47 -25L 19,0 0.75 -40L 30,5 1.20 -63L 47,0 1.85 -90L 70,5 2.78
16,5 24,5 39,0 58,0 84,5
-5,-6 -4,-5 -5,-6 -5 -5 -4, -5 -8 -8 -8 -10 -8,-10 -10 -8,-10 -10 -8 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16
0.65
0.96
1.54 -16 -16 -16
2.28
3.33 -32
-5, -6 -4,-5 -8, -10
-16
-5, -6 -10
-5,-6 -8,-10
-5, -6 -10
-5 -8, -10
-5 -4,-5 -8 -8
-8
-20L
15,0
0.59
20,0
0.79
-8
-8
-6
-6
-6
-6
-6
-6
-8
-6
-8
-6
-6, -8
-6
-8
-6
-32L
23,0
0.91
30,0
1.18
-12
-12
-12
-12
-10,-12
-12
-10,-12
-10,-12
-12
-12
-12
-12
-12
-12
-10, -12
-12
-50L
38,0
1.50
46,5
1.83
-20
-20
-20
-20
-20
-20
-20
-24 -24 -24 -24
-75L
61,0
2.40
73,0
2.87
-32
-32
-32
-110L
84,0
3.31
99,0
3.90
CONNECTING PARTNERSHIPS
159
TECHNICAL
ADAPTORS
COUPLINGS
HOSE
INTRODUCTION
T3000D/S T3600C T3600D/S T4000D/S T5000D/S
T6000D/S H3000D/S H4000D/S H5000C
H5000D/S
H6000D/S C6000D/S DF1D DF2D DK1D/E/S DK2D/E/S EC1
EC2
ECP1 E1