Page 164 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 164

 HOSE
HOSE PROTECTION – RHYS PACKAGING SLEEVE
  RHYS
PACKAGING SLEEVE
                      RECOMMENDED FOR:
Packaging and protection of hose assemblies, in transit and in storage. RYCO RHYS Packaging Sleeve is installed over the finished hose assembly. The ends may be heat sealed, or folded over and stapled, or taped closed.
CONSTRUCTION:
Heavy gauge low density polyethylene clear plastic tubing; printed at intervals with “RYCO” logo, and incorporating an area for the hose assembly Part Number
to be written.
ASSEMBLY INSTRUCTIONS:
1. Select correct size of RYCO RHYS Packaging Sleeve. It must be large enough to allow for the maximum outside profile of the hose couplings.
2. Two sizes are available:
3. RHYS-75 suits most hoses up to -16 (1”) hose bore. 4. RHYS-125 suits most hoses from -16 to -32 (1” to 2”)
hose.
5. If required, write the hose assembly Part Number onto
the Packaging Sleeve using a ball point pen.
6. Slide the hose assembly into the RHYS Packaging
Sleeve.
7. Trim Packaging Sleeve to length, and seal ends.
STANDARD COIL LENGTHS:
350 metres (1,150 feet).
 RHYS HOSE ASSEMBLY PACKAGING SLEEVE SPECIFICATIONS
   PACKAGING SLEEVE
     PART NO
NOMINAL ID
NOMINAL WALL THICKNESS
NOMINAL INSIDE FLAT DIMENSION
NOMINAL WEIGHT
          A mm
A inch
B mm
B inch
C mm
C inch
kg/m
lb/ft
                   RHYS-75
48
1.9
0,15
0.006
75
3.0
0,021
0.014
          RHYS-125
79
3.1
0,15
0.006
125
5.0
0,035
0.023
                        162 RYCO QUALITY












































   162   163   164   165   166