Page 166 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8
P. 166
HOSE
HOSE PROTECTION – 750/760 SPRING GUARD
750/760 SPRING GUARD
RECOMMENDED FOR:
TJ24D and TJ26D Specialist Jacking Hose Assemblies, to control bend radius at end of hoses to avoid excessive strain on hose couplings. Can also be used with E24, E26, RQP24, RQP26, T24C, T24D, T24S, T26C, T26D and T26S Hoses. Can be used with L000 Series Field Attachable and T2000 Series BITELOK Couplings.
CONSTRUCTION:
Spring Steel Wire; galvanised for corrosion protection.
ASSEMBLY INSTRUCTIONS:
Slide Spring Guards over the hose before assembling hose ends. After ends are assembled, twist and push Spring Guards onto the ferrules. The close pitched end of the Spring Guard goes over the ferrule, and the wide pitched end goes over the hose (as depicted in below image).
750 760
Suits some -4 (1/4”) and -6 (3/8”) hoses Suits some -6 (3/8”) hoses
164
HIGHER TECHNOLOGYRYECQOUAQLUSALGIRTEYATER PERFORMANCE
