Page 167 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

RECOMMENDED FOR:
Permanent identification of hose assemblies. QRAM Hose Tags enable hose assembly information to be attached to the hose assembly in a cost effective manner.
Information can be printed on the Hose Tag prior to being attached to the hose. When the Hose Tag is wrapped on the hose, a clear panel at the end of the tag wraps over to protect the written or printed information.
Hose Tag remains in position on the hose due to the adhesive backing, and the Hose Tag bends with the hose, ensuring that flexibility is not affected.
The slim profile of the attached Hose Tag reduces the risk of accidental removal. Hose Tag does not damage or cut the cover of the hose.
CONSTRUCTION:
Heat, oil, ozone, sunlight, and weather resistant high performance plastic.
Adhesive-backed for permanent attachment to the hose assembly. Area to write or print information, with a clear panel that wraps over to protect the hose assembly identification information.
TEMPERATURE RANGE:
Suitable for use with all RYCO Hoses at their published temperature ranges.
ASSEMBLY INSTRUCTIONS:
HOSE TRACKING – QRAM HOSE LABEL
QRAM QRAM LABEL
1. 2. 3. 4.
5.
6.
Two sizes are available:
QRAM-S suits hose sizes -04 to -20 (1/4” to 1 1/4”). QRAM-L suits hose sizes -12 to -32 (3/4” to 2”).
Remove the release paper from the back of the Hose Tag to expose the adhesive.
While ensuring that the Hose Tag is parallel to the axis of the hose, wrap the Hose Tag tightly around the hose, then continue to wrap the clear plastic panel over the Hose Tag.
Press firmly to ensure that the adhesive bonds.
QRAM HOSE TAGS SPECIFICATIONS
QRAM-S (Small) 6 to 31 1/4 to 1.1/4” -04 to -20
QRAM-L (Large) 12 to 51 3/4 to 2” -12 to -32
Contact RYCO for further information.
50mm x 174.5mm
50mm x 279.5mm
PART NO
SUITS HOSE SIZE ID RANGE
DN
INCH
DASH
SIZE
CONNECTING PARTNERSHIPS 165
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION