Page 230 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 230

 COUPLINGS
T2000 SERIES ONE-PIECE CRIMP COUPLINGS
DIMENSIONS FOR SAE CODE 61 AND CODE 62 FLANGES, AND RYCO CODE 62C FLANGES
           CODE 61 FLANGE B T
inch mm inch   mm inch mm
CODE 62 CODE 62C
B T B T
inch mm   inch mm inch mm inch
1.25   7,75   0.305
1.63   8,76   0.345   41,3 1.63 14,20 0.559 1.88   9,53   0.375   47,6 1.88 14,20 0.559 2.12   10,29   0.405   54,0 2.12 14,20 0.559 2.50   12,57   0.495   63,5 2.50 14,20 0.559 3.13   12,57   0.495   79,4 3.13 14,20 0.559
NOMINAL
                                 1/2   30,2 1.19   6,73 5/8   34,0 1.34   6,73 3/4   38,1 1.50   6,73
1   44,5 1.75   8,00 1.1/4   50,8 2.00   8,00 1.1/2   60,3 2.38   8,00
2   71,4 2.81   9,53
0.265   31,8 0.265
0.265   41,3 0.315   47,6 0.315   54,0 0.315   63,5 0.375   79,4 0.375
0.375
                                                                                                 2.1/2 84,1 3.31 3 101,6 4.00
9,53 9,53
      NOTE: RYCO Code 62C fittings conform RYCO Code 62C flange heads are
SAE FLANGE
RYCO
CODE 61
CLAMPS - SEE PAGES 440 & 441
O RING NOT SUPPLIED
to the flange OD and bolt hole patterns of SAE Code 62 but require special flange clamps. thicker than SAE Code 62 and measure T = 14,2 mm (0.559 inch) in all sizes.
    T2130
CODE 61 FLANGE
CA
T2150
                    L
L
                                                            HOSE SIZE
NOM. FLANGE SIZE
DASH SIZE
CODE 61 FLANGE 45o TUBE BEND
             PART NO
L
PART NO CA
L
DL
mm   inch   mm
74   0.79   20 76   0.94   24 87   0.94   24 89   1.02   26 95   1.02   26 98   1.18   30 106   1.10   28 112   1.18   30 114   1.26   32 116   1.57   40 137   1.18   30 149   1.42   36 152   1.57   40 162   1.65   42
206   2.28   58
   DN   inch   inch   inch     inch   mm
12   1/2   1/2   -0808   T2130-0808   1.77   45 12   1/2   3/4   -0812   T2130-0812   1.89   48 16   5/8   5/8   -1010   T2130-1010   1.73   44 19   3/4   5/8   -1210   T2130-1210   1.77   45 19   3/4   3/4   -1212   T2130-1212   1.81   46 19   3/4   1   -1216   T2130-1216   1.97   50 25   1 3/4   -1612   T2130-1612   1.89   48 25   1 1   -1616   T2130-1616   2.05   52 25   1   1.1/4   -1620   T2130-1620   2.24   57 25   1   1.1/2   -1624   T2130-1624   3.31   84 31   1.1/4   1   -2016   T2130-2016   2.13   54 31   1.1/4   1.1/4   -2020   T2130-2020   2.32   59 31   1.1/4   1.1/2   -2024   T2130-2024   3.35   85 38   1.1/2   1.1/2   -2424   T2130-2424   3.35   85 38   1.1/2   2   -2432   T2130-2432   3.74   95 51   2 2   -3232   T2130-3232   3.78   96 51   2   2.1/2   -3240   T2130-3240   3.98   101 63   2.1/2   2.1/2   -4040   T2130-4040   3.11   79 76   33   -4848   T2130-4848   3.15   80
inch   mm     inch   mm   inch
2.76   70   T2150-0808   1.93   49   2.91 2.83   72   T2150-0812   2.01   51   2.99 2.95   75   T2150-1010   2.20   56   3.43 2.95   75   T2150-1210   2.32   59   3.50 2.99   76   T2150-1212   2.56   65   3.74 3.15   80   T2150-1216   2.68   68   3.86 3.11   79   T2150-1612   2.95   75   4.17 3.23   82   T2150-1616   3.19   81   4.41 3.46   88   T2150-1620   3.27   83   4.49 4.53   115   T2150-1624   3.35   85   4.57 4.06   103   T2150-2016   3.46   88   5.39 4.25   108   T2150-2020   3.94   100   5.87 5.28   134   T2150-2024   4.06   103   5.98 5.39   137   T2150-2424   4.33   110   6.38 5.79   147
5.98   152   T2150-3232   5.91   150   8.11 6.18   157
6.14   156
6.14   156
                                                                                                                228
NOTE: Hose Compatibility for the T2000 series can be found on page 188. RYCO QUALITY














































   228   229   230   231   232