Page 293 - 2019 RYCO Product Technical Manual V1-8
P. 293

     T7000 SERIES ONE-PIECE CRIMP COUPLINGS
  TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
DIMENSIONS FOR SAE CODE 61 AND CODE 62 FLANGES, AND RYCO CODE 62C FLANGES
       CODE 61 FLANGE B T
inch mm inch   mm inch mm
1/2   30,2 1.19 6,73   0.265   31,8 5/8   34,0 1.34 6,73   0.265
3/4   38,1 1.50 6,73   0.265   41,3
1   44,5 1.75 8,00   0.315   47,6 1.1/4   50,8 2.00 8,00   0.315   54,0 1.1/2   60,3 2.38 8,00   0.315   63,5
2   71,4 2.81 9,53   0.375   79,4
CODE 62 CODE 62C
B T B T
inch mm inch mm inch mm inch
1.25   7,75   0.305
1.63   8,76   0.345   41,3 1.63 14,20 0.559 1.88   9,53   0.375   47,6 1.88 14,20 0.559 2.12   10,29   0.405   54,0 2.12 14,20 0.559 2.50   12,57   0.495   63,5 2.50 14,20 0.559 3.13   12,57   0.495   79,4 3.13 14,20 0.559
NOMINAL
                                                                                                                                   2.1/2 84,1 3.31 9,53 3 101,6 4.00 9,53
0.375 0.375
       NOTE: RYCO Code 62C fittings conform to the flange OD and bolt hole patterns of SAE Code 62 but require special flange clamps. RYCO Code 62C flange heads are thicker than SAE Code 62 and measure T = 14,2 mm (0.559 inch) in all sizes.
   SAE FLANGE
RYCO
CODE 61
CLAMPS - SEE PAGES 440 & 441
O RING NOT SUPPLIED
T7130
CA
L
CODE 61 FLANGE
PART NO   CA
T7140
 DL
CA
L
                                                                                            NOM. FLANGE
HOSE SIZE SIZE
DASH SIZE
CODE 61 FLANGE 22.5o TUBE BEND
L PARTNO CA L
inch mm     inch   mm   inch   mm
                  DN   inch   inch       inch   mm
12   1/2   1/2   -0808   T7130-0808   1.77   45 12   1/2   3/4   -0812   T7130-0812   1.89   48 19   3/4   5/8   -1210   T7130-1210   1.77   45 19   3/4   3/4   -1212   T7130-1212   1.81   46 19   3/4   1   -1216   T7130-1216   1.97   50 19   3/4   1.1/4   -1220   T7130-1220   2.24   57 25   1 1   -1616   T7130-1616   2.05   52 25   1   1.1/4   -1620   T7130-1620   2.24   57 25   1   1.1/2   -1624   T7130-1624
31   1.1/4   1   -2016   T7130-2016   2.13   54 31   1.1/4   1.1/4   -2020   T7130-2020   2.32   59 31   1.1/4   1.1/2   -2024   T7130-2024
38     1.1/2   1.1/4   -2420   T7130-2420   2.36   60 38   1.1/2   1.1/2   -2424   T7130-2424   3.35   85 38   1.1/2   2   -2432   T7130-2432   3.74   95 51   2 2   -3232   T7130-3232   3.78   96 51   2   2.1/2   -3240   T7130-3240   3.98   101 63   2.1/2   2.1/2   -4040   T7130-4040   3.11   79
DL
inch   mm
                  2.83 72
2.95 75
2.99 76
3.03 77   T7140-1212   2.83   72 4.06   103   0.47   12 3.19 81   T7140-1216   2.95   75 4.17   106   0.59   15 3.46 88
3.74 95   T7140-1616   3.43   87 5.12   130   0.55   14 3.94 100   T7140-1620   3.43   87 5.12   130   0.51   13
4.13 105
4.33 110   T7140-2020   4.17   106   6.18   157   0.63   16
T7140-2024   4.29   109   6.30   160   0.79   20 4.57 116
5.59 142   T7140-2424   4.65   118   6.85   174   0.94   24 5.98 152   T7140-2432   5.28   134   7.48   190   1.06   27 6.22 158   T7140-3232   6.38   162   8.86   225   0.98   25 6.42 163
6.14 156
                                                                                                                                   NOTE: Hose Compatibility for the T7000 series can be found on page 273.
HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE 291
 










































   291   292   293   294   295