Page 305 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 305

     T7000 SERIES ONE-PIECE CRIMP COUPLINGS
  UNO (O RING BOSS)
  T7200
                             HM
CA
        O RING SUPPLIED
L
                   HOSE SIZE
THRD SIZE
TUBE SIZE
DASH SIZE
MALE HEX
UN O RING MALE
                PART NO
CA
inch mm
L
inch mm
           DN
inch
inch
inch
HM-SPANNER
inch mm
                           19
3/4
1.1/16
3/4
-1217
1.1/4
32
T7200-1217
1.73
44
2.95
75
            25
1
1.5/16
1
-1621
1.1/2
38
T7200-1621
1.73
44
3.43
87
            HAMMER UNION
  T71502
  T71501
                                                                                              FIGURE 1502 L STANDARD SERVICE
L
                                HOSE SIZE
THRD SIZE
DASH SIZE
FIG 1502 MALE (WITH NUT)
FIG 1502 FEMALE (WITH SEAL)
                 PART NO
CA
inch mm
L
inch mm
PART NO
CA
inch mm
L
inch mm
              DN
inch
inch
                              38
1.1/2
4.1/8
-2432
T71502-2432
4.33
110
6.57
167
T71501-2432
3.58
91
5.83
148
               51
2
4.1/8
-3232
T71502-3232
4.37
111
6.81
173
T71501-3232
3.62
92
6.06
154
                             NOTE: Nut must be installed onto hose before coupling is installed and crimped. Replacement parts RF1502N-32 nut and RF1502W-32 Nitrile seal are available.
  NOTE: Hose Compatibility for the T7000 series can be found on page 273.
 HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE 303
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   303   304   305   306   307