Page 35 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

HOSE COUPLINGS
Part Numbers comprise Coupling Series and End Style Number followed by the Dash Size of the Hose and the Dash Size of either the Thread or Connector Size. Coupling Series and End Style Numbers are described at start of Hose Coupling Section. (See page 169 and pages 183 to 310)
EXAMPLES
T2000 ONE-PIECE CRIMP COUPLING
3/4” hose x 1.1/16” JSEALTM Female
Order Part No. T2040-1217
T2040-1217 T2040-1217
T2040-1217 T2040-1217
T2000 Series Coupling JSEALTM Female End Style
is the Size Designator (Dash Size), (Hose Size then Thread Size)
-12 = 12/16” = 3/4” hose
-17 = 17/16” = 1.1/16” thread
T2040-1217
FIELD ATTACHABLE INSERT
DASH SIZE PART NUMBERING
1/2” BSPT Male for 3/8” hose.
Order Part No. 6010-0608
6010-0608 6010-0608
6010-0608 6010-0608
6010-0608
ADAPTORS
Part Numbers comprise of Group Designator followed by Dash Size.
(Group Designators are shown in Adaptors Pictorial Index pages 393 to 400)
EXAMPLES
NPT MALE TO NPT MALE NIPPLE (STRAIGHT)
3/4” NPT Male x 1/4” NPT Male Nipple
Order Part No. S27N-1208
S27N-1208 Group Designator for NPT Male Nipple
6000 Series Insert BSPT Male End Style
is the Size Designator (Dash Size), (Hose Size then Thread Size)
-06 = 6/16” = 3/8” hose -08 = 8/16” = 1/2” thread
S27N-1208 S27N-1208 S27N-1208
is the Dash Size (A end then B end) -12 = 12/16” = 3/4” thread (A)
-08 = 8/16” = 1/2” thread (B)
JIC MALE TO UNO RING MALE 90 ELBOW
3/4” JIC Male x 1.5/16” UNO Ring Male 90 Elbow
Order Part No. S91-1221
S91-1221
S91-1221 S91-1221 S91-1221
Group Designator for NPT Male Nipple
is the Dash Size (A end then B end)
-12 = 12/16” = 3/4” thread (JIC) (A)
-21 = 21/16” = 1.5/16” thread (UNO) (B)
There are supplementary rules which determine the listing order for multi-ended adaptors. These rules are shown in detail on pages 30 to 31
See RYCO Product Technical Manual for Important Note regarding Thread Dash Sizes/Tube Dash Sizes.
CONNECTING PARTNERSHIPS 33
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION