Page 448 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

ADAPTORS
SAE ADAPTORS & SAE FLANGE BLOCKS
SAE FLANGE/ORFS
CODE 62
SAE FLANGE
O RING NOT SUPPLIED
inch inch
1.1/2 2 -2432
S147H
PART NO
S146H
S143H
NOM. FLANGE A
THREAD B
DASH SIZE
CODE 62 FLANGE ORFS MALE
CODE 62 FLANGE ORFS MALE 45o TUBE BEND
CODE 62 FLANGE ORFS MALE 90o TUBE BEND
PART NO
DL1
DL2
PART NO S143H-2432
DL1 DL2
115 94
1
1.7/16
-1623
S147H-1623
S146H-1623
70
125
S143H-1623
94
77
NOTE: Drop Lengths (DL) dimensions are in millimetres.
FLANGE OD can be found on page 443, CLAMPS can be found on page 442.
ADAPTORS – SAE FLANGE BLOCKS
RYCO SAE Flange Blocks shown on pages 446 to 460 incorporate the SAE Flange Head and the SAE Flange Clamp into a single forged carbon steel unit.
RYCO SAE Flange Blocks with O Ring groove have unthreaded bolt holes.
RYCO Flat Flange blocks S940F, S941F, S970F, S971F, S976F, S977F, S951F and S952F have UNC threaded bolt holes for use with FK61 and FK62 Fastening Kits. (NOTE suffix ''F'' means Flat Face with UNC threaded bolt holes).
RYCO Flat Flange blocks S940FM, S941FM, S970FM, S971FM, S951FM and S952FM have METRIC threaded bolt holes for use with FK61M and FK62M Fastening Kits. (NOTE suffix ''FM'' means Flat Face with METRIC threaded bolt holes).
FOR DIMENSIONS OF SAE FLANGE BLOCKS, SEE PAGE 512.
Due to restricted clearance on the neck of Socket Weld and BSPP Female Flange Blocks, Hex Head Bolts cannot be used. FK61, FK61M, FK62 and FK62M Fastening Kits, which include Socket Head Cap Bolts and special Square Section Spring Washers, must be used.
Blind, Butt Weld, BSPP Male and JIC Male Flange Blocks may be used with Hex Head Bolts and standard Spring Washers if preferred.
Bolts are shown for illustration purposes only. Bolts and O Ring are not included. See below for Fastening Kits.
SAE FLANGE BLOCKS
FK61
PART NO FK61-12 FK61-20 FK61-32
FK62
PART NO FK62-12 FK62-20 FK62-32
FK61M
PART NO FK61M-12 FK61M-20 FK61M-32
FK62M
PART NO FK62M-12 FK62M-20 FK62M-32
FASTENING KITS WITH O RING, SOCKET HEAD CAP BOLTS
& WASHERS
inch
3/4 1.1/4 2
-12 -20 -32
NOM. FLANGE SIZE
DASH SIZE
SUITS SAE FLANGE BLOCKS CODE 61, UNC BOLTS
SUITS SAE FLANGE BLOCKS CODE 62, UNC BOLTS
SUITS SAE FLANGE BLOCKS CODE 61, METRIC BOLTS
SUITS SAE FLANGE BLOCKS CODE 62, METRIC BOLTS
1/2
-08
FK61-08
FK62-08
FK61M-08
FK62M-08
1
-16
FK61-16
FK62-16
FK61M-16
FK62M-16
1.1/2
-24
FK61-24
FK62-24
FK61M-24
FK62M-24
446
RYCO QUALITY