Page 45 - 2019 RYCO Product Technical Manual V1-8
P. 45

      PICTORIAL INDEX
 HOSE PROTECTION
   INSIDE DIAMETER
   RECOMMENDED
  CONSTRUCTION
   PERFORMANCE SPECIFICATIONS MET OR EXCEEDED
  COUPLING SERIES
   151
   FS
FIRE SLEEVE
   -08 to -104
1/2” to 6.1/2”
   Protection of hoses from heat and molten metal splashes.
   Braided glass fibre tubing coated with silicon rubber.
   SAE Aerospace Standard AS 1072
      154
 RCS
CROCSLEEVE
23 to 129 mm
7/8” to 5”
Burst and pinhole protection. Protection of hoses from abrasion.
Bundling hoses together.
Woven polyamide. RCSB - Black.
RCSR - Red.
MSHA approved FRAS
   157
    RH
RAWHIDE
    23 to 93 mm
7/8” to 3.5/8”
    Protection of hoses from severe abrasion. Bundling hoses together.
    Woven nylon tubing.
    MSHA approved
       158
RSG
SPIRAL GUARD
 16 to 110 mm
(OD) 5/8” to 4.1/2”
Protection of hoses from abrasion and impact. Bundling hoses together.
Polyethylene plastic spiral.
Black.
   158
     RSGF
SPIRAL GUARD FRAS
    16 to 110 mm
(OD) 5/8” to 4.1/2”
    Protection of hoses from abrasion and impact. Bundling hoses together.
    Polyethylene plastic spiral.
Dark Grey.
    MSHA approved FRAS
       158
 RSGY
SPIRAL GUARD
16 to 110 mm
(OD) 5/8” to 4.1/2”
Protection of hoses from abrasion and impact. Bundling hoses together.
Polyethylene plastic spiral.
Yellow
   160
    RWA
PUSH ON
           12 to 75 mm
1/2” to 3”
    Protection of hose cover from abrasion and gouges.
    Spring Steel Wire, galvanised.
           162
   RHYS
PACKAGING SLEEVE
  48 & 79mm
1.9” and 3.1”
  Packaging and protection of hose assemblies during transport and storage.
  Heavy duty, low density polyethylene sleeve.
        164
    QRAM
QRAM LABEL
   Suits sizes -04 to -20 &
-12 to -32
  Permanent identification of hose assemblies.
  High performance plastic.
        165
RHYT
RHYT-10, -32
 ASSEMBLED BY DATE PART-NUMBER
DESCRIPTION
        ASSEMBLED BY DATE PART-NUMBER DESCRIPTION
Suits sizes -04 to -10 &
-12 to -32
Permanent identification of hose assemblies.
High performance plastic.
   165
RHWT
RHWT-10, -32
              Suits sizes -04 to -10 &
-12 to -32
  Permanent identification of hose assemblies.
  High performance plastic.
                                                                          163
   750/760
SPRING GUARD
      Suits some -04 (1/4”) & -06 (3/8”) hoses
   Control bend radius at end of hose assemblies.
   Spring Steel Wire, galvanised.
                      HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE 43
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   43   44   45   46   47