Page 457 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

MISCELLANEOUS - PLASTIC CAPS AND PLUGS
BSP/NPT
THREADED PLASTIC PROTECTORS
inch
1/4 100 1/2 100 1 100
1.1/2 10
JIC/SAE/UNO
THREADED
PLASTIC PROTECTORS
TEAR OFF PLASTIC THREAD PROTECTOR
1/2-20 100 5/8-18 100 7/8-14 100
BPD BCD
PART NO PART NO BPD-04 BCD-04 BPD-08 BCD-08 BPD-16 BCD-16 BPD-24 BCD-24
JPPD JPD
JCD
PART NO JCD-08 JCD-10 JCD-14 JCD-19 JCD-26
JCTD
PART NO
JCTD-14
JCTD-26
THREAD SIZE
PACK QTY
PLUG SUITS FEMALE BSP & NPSM
CAP SUITS MALE BSP & NPT
1/8
100
BPD-02
BCD-02
3/8
100
BPD-06
BCD-06
3/4
100
BPD-12
BCD-12
1.1/4
10
BPD-20
BCD-20
2
10
BPD-32
BCD-32
THREAD SIZE
PACK QTY
PUSH-IN PLUG SUITS FEMALE JIC, SAE & UNO
PLUG SUITS FEMALE JIC, SAE & UNO
CAP SUITS MALE JIC, SAE & UNO
TEAR OFF CAP SUITS MALE JIC, SAE & UNO
PART NO
JPPD-14
PART NO JPD-08 JPD-10 JPD-14 JPD-19 JPD-26
7/16-20
100
JPPD-07
JPD-07
JCD-07
JCTD-07
9/16-18
100
JPPD-09
JPD-09
JCD-09
JCTD-09
3/4-16
100
JPPD-12
JPD-12
JCD-12
JCTD-12
1.1/16-12
100
JPPD-17
JPD-17
JCD-17
JCTD-17
1.3/16-12 1.5/8-12
100 10
1.5/16-12
100
JPD-21
JCD-21
JCTD-21
1.7/8-12
10
JCTD-30
NOTE: Plastic Thread Protectors are sold only in packs with quantities as shown. To order individual Plastic Thread Protectors, remove the “D” preceding the part number dash. Example: Order Part No BP-02 for individual part (“D” is removed from BPD-02 packaged Part No). Surcharges for breaking packages mat apply.
Part Numbers for Plastic Caps and Plugs: First letter denotes Thread Type, B = BSP, O = ORFS etc. Second letter denotes Plug or Cap, P = Plug, C = Cap. A “D” before the dash represents the packaged part number (omit for unpackaged, individual Plug or Cap). Numbers after the dash represent the Thread Size or Dash Size of the Plug or Cap.
CONNECTING PARTNERSHIPS
455
TECHNICAL ADAPTORS COUPLINGS ADAPTORS INTRODUCTION