Page 458 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

ADAPTORS
MISCELLANEOUS - PLASTIC CAPS AND PLUGS
METRIC
THREADED PLASTIC PROTECTORS
mm
14x1,5 100 18x1,5 100 22x1,5 100 26x1,5 100 30x2,0 10 42x2,0 10 52x2,0 10
ORFS
THREADED PLASTIC PROTECTORS
inch
11/16 100 1 100 1.7/16 100
MPD
PART NO MPD-1415 MPD-1815 MPD-2215 MPD-2615 MPD-3020 MPD-4220 MPD-5220
OPD
PART NO OPD-11 OPD-16 OPD-23
MCD
PART NO MCD-1415 MCD-1815 MCD-2215 MCD-2615 MCD-3020 MCD-4220 MCD-5220
OCD
PART NO OCD-11 OCD-16 OCD-23
THREAD SIZE
PACK QTY
PLUG SUITS FEMALE METRIC
CAP SUITS MALE METRIC
12x1,5
100
MPD-1215
MCD-1215
16x1,5
100
MPD-1615
MCD-1615
20x1,5
100
MPD-2015
MCD-2015
24x1,5
100
MPD-2415
MCD-2415
30x1,5
10
MPD-3015
36x2,0
10
MPD-3620
MCD-3620
45x2,0
10
MPD-4250
MCD-4250
THREAD SIZE
PACK QTY
PLUG SUITS FEMALE ORFS
CAP SUITS MALE ORFS
9/16
100
USE JPD-09
USE JCD-09
13/16
100
OPD-13
OCD-13
1.3/16
100
USE JPD-19
USE JCD-19
1.11/16
10
OCD-27
NOTE: Plastic Thread Protectors are sold only in packs with quantities as shown. To order individual Plastic Thread Protectors, remove the “D” preceding the part number dash. Example: Order Part No BP-02 for individual part (“D” is removed from BPD-02 packaged Part No). Surcharges for breaking packages mat apply.
Part Numbers for Plastic Caps and Plugs: First letter denotes Thread Type, B = BSP, O = ORFS etc. Second letter denotes Plug or Cap, P = Plug, C = Cap. A “D” before the dash represents the packaged part number (omit for unpackaged, individual Plug or Cap). Numbers after the dash represent the Thread Size or Dash Size of the Plug or Cap.
456
HIGHER TECHNOLOGYRYECQOUAQLUSALGIRTEYATER PERFORMANCE