Page 459 - 2019 PRODUCT TECHNICAL MANUAL - HYDRAULICS V4-8

SAE FLANGE
FLANGE COVERS PLASTIC
CODE 61
CODE 62
R62C TYPE
3/4 100 1.1/4 10 2 10
8000 SERIES
PUSH ON
HOSE TAIL PLASTIC COLLAR
5/16 100 1/2 100 3/4 100
FC61D
PART NO FC61D-12 FC61D-20 FC61D-32
PPD
FC62D
PART NO FC62D-12 FC62D-20 FC62D-32
R62C TYPE
PART NO USE FC62D-12 USE FC62D-20
MISCELLANEOUS - PLASTIC CAPS AND PLUGS
NOM. FLANGE SIZE
PACK QTY
SUITS SAE CODE 61 FLANGE
SUITS SAE CODE 62 FLANGE
SUITS R62C FLANGE
1/2
100
FC61D-08
FC62D-08
1
100
FC61D-16
FC62D-16
USE FC62D-16
1.1/2
10
FC61D-24
FC62D-24
USE FC62D-24
HOSE SIZE
PACK QTY
SUITS 8000 SERIES FITTING
1/4
100
PPD-04
PPD-05 PPD-08 PPD-12
3/8
100
PPD-06
5/8
100
PPD-10
NOTE: Plastic Thread Protectors are sold only in packs with quantities as shown. To order individual Plastic Thread Protectors, remove the “D” preceding the part number dash. Example: Order Part No BP-02 for individual part (“D” is removed from BPD-02 packaged Part No). Surcharges for breaking packages mat apply.
Part Numbers for Plastic Caps and Plugs: First letter denotes Thread Type, B = BSP, O = ORFS etc. Second letter denotes Plug or Cap, P = Plug, C = Cap. A “D” before the dash represents the packaged part number (omit for unpackaged, individual Plug or Cap). Numbers after the dash represent the Thread Size or Dash Size of the Plug or Cap.
CONNECTING PARTNERSHIPS
457
TECHNICAL ADAPTORS COUPLINGS ADAPTORS INTRODUCTION