Page 513 - 2019 RYCO Product Technical Manual V1-8
P. 513

 THREAD AND CONNECTOR IDENTIFICATION
RYCO CROCBITE - MINE SAFE CONNECTION SYSTEM
The CROCBITE male uses a rubber seal which seals on the smooth bore of the female. The connection is held together by the CROCTAIL and cannot be disconnected under pressure.
CROCBITE High Pressure and High Flow series’ are not interchangeable, however the CROCTAIL is common for both series.
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
-10 & -12 CROCBITE male & female can interchange with RYCOLOK. -20 CROCBITE female can connect with RYCOLOK male.
Sealing method: O Ring & Back up washer, or profiled seal
Thread form:
None
DN
10 12 19 25 31 38 51 63 76
51 63 76
420 BAR
inch
2.6 3.0 3.7 5.1 6.3 7.5 8.3 9.8 11.8
8.3 9.8 11.8
NOMINAL SIZE
inch Dash
3/8 -10 1/2 -12 3/4 -20
1 -25 1.1/4 -32 1.1/2 -40
2 -50 2.1/2 -63 3 -75
2 -50 2.1/2 -63 3 -75
OD
mm inch
HIGH PRESSURE
20 0.79 24 0.94 29 1.14 40 1.57 47 1.85 56 2.20 68 2.68 88 3.46 100 3.94
HIGH FLOW
69 2.72 89 3.50 101 3.98
CROCTAIL LENGTH L
1,000,000+ IMPULSE CYCLES
CONFORMS WITH THE REQUIREMENTS OF MDG 41
HIGHER TECHCNOONLNOEGCYTEINQUGAPLASRGTNREARTSEHRIPPSERFORMANCE
511
GROOVE WIDTH
G G L
mm inch mm
5 0.20 65 5 0.20 75 5 0.20 95 6 0.24 130 6 0.24 160 6 0.24 190 10 0.39 210 10 0.39 250 10 0.39 300
10 0.39 210 10 0.39 250 10 0.39 300





























































   511   512   513   514   515