Page 515 - 2019 RYCO Product Technical Manual V1-8
P. 515

     THREAD AND CONNECTOR IDENTIFICATION
  RYCO WEO
CARTRIDGE & CARTRIDGE PORT SPECIFICATIONS
               PLUG-IN SIZE
TO SUIT RYCO WEO CARTRIDGE
A
B
C
D
E
F
G
H
J
K
L
ASSEMBLY TORQUE
                                DN
Dash
                   6
DN6 (1/4") DN10 (3/8") DN12 (1/2") DN19 (3/4")
RW800-04 RW800-06 RW800-08 RW800-12
-04
inch
1/4
PART No
RW800-04
10.03 +0.08
mm
12.75 +0.10
mm
16.55 +0.07
mm
17.0 +0.1
thread
M18x1,0
mm
8.5 +1
mm
1.1 -0.1
mm
10.65 +0.1
mm
14.15 +0.2
mm
19.65 +0.15
0.2
Nm
25-35
                 10
-06
3/8
RW800-06
13.03 +0.08
16.95 +0.15
20.55 +0.07
21.0 +0.1
M22x1,0
8.7 +1
1.15 -0.1
11.1 +0.1
15.5 +0.2
21.95 +0.15
0.2
30-40
                 12
-08
1/2
RW800-08
16.03 +0.08
19.95 +0.15
23.55 +0.07
24.0 +0.1
M25x1,0
8.7 +1
1.25 -0.1
11.3 +0.1
15.7 +0.2
22.15 +0.15
0.3
40-50
                 19
-12
3/4
RW800-12
mm
23.03 +0.08
27.95 +0.15
31.05 +0.07
31.5 +0.1
M33x1,5
11.5 +1
1.7 -0.1
16.5 +0.1
21.4 +0.2
31.35 +0.15
mm
0.3
70-80
                   AVAILABLE RYCO WEO CARTRIDGE SIZES:
K
        0.05
 A
       Lx45o
G 4
J
H
A
     WORKING PRESSURE:
DN6 to DN19 (1/4" to 3/4") 350 bar (5,100 psi)
MINIMUM BURST PRESSURE:
DN6 to DN19 (1/4" to 3/4") 1400 bar (20,400 psi)
TEMPERATURE RANGE:
-30°C to +100°C (-22°F to 212°F)
0.7x45o
                                   30o
F
                                             4
              Sharp edges to be deburred 0.05-0.20 mm Dimension in millimeters
 Material Specification
O Ring – NBR Support ring – Hytrel®
Washer – hardened steel
(CrIV-free plating) O Ring – NBR
Locking hooks – hardened steel
(CrIV-free plating)
Frontpart – steel
(CrIV-free plating)
Pre-applied micro-encapsulated thread locker
Dustcap – LDPE
       CONNECTING PARTNERSHIPS 513
Rmax 0.2
R0.5+0.3
TECHNICAL
ADAPTORS
COUPLINGS
HOSE INTRODUCTION
ØA ØB ØC ØD ØE
   513   514   515   516   517