Page 66 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 66

 HOSE
ISOBARIC BRAID
  T3600C
LOW TEMPERATURE COMPACT ISOBARIC HOSE 250 BAR / 3625 PSI
                                                                                                         RECOMMENDED FOR:
High pressure hydraulic oil lines in applications where low temperature environmental conditions exist.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC.
TUBE:
Black, specially formulated oil resistant synthetic rubber.
REINFORCEMENT:
One braid (-04 to -06 size) or two braids (-08 to -16 size) of high tensile wire.
COVER:
Black, oil resistant and abrasion resistant synthetic rubber. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
Extremely Flexible. Minimum Bend Radius 25% less than published SAE 100R17 Minimum Bend Radius. Tested to 500,000 cycles. Constant pressure 250 bar / 3625 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages
in installations.
TEMPERATURE RANGE:
From -60°C to +100°C (-76°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 188 to 233. Assembly Instructions pages 478.
T3600D – DIEHARD COMPACT ISOBARIC HOSE
                         PART NO
  HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
  AVERAGE WEIGHT
 COUPLING SERIES
  ONE PIECE
                 Hose
   DN
  Dash
  mm
 inch
   mm
  inch
  bar
  psi
  bar
  psi
 mm
   inch
  kg/m
  lb/ft
  NON-SKIVE
  T3604C
  6
 -04
 6,6
1/4
  11,8
 0.46
 250
 3625
 1000
 14500
38
  1.5
 0,16
 0.11
 T2000
 T3605C
  8
 -05
 8,2
5/16
  14,4
 0.57
 250
 3625
 1000
 14500
40
  1.6
 0,23
 0.15
 T2000
 T3606C
  10
 -06
 9,8
3/8
  15,6
 0.61
 250
 3625
 1000
 14500
49
  1.9
 0,27
 0.18
 T2000
 T3608C
  12
 -08
 13,0
1/2
  19,9
 0.78
 250
 3625
 1000
 14500
68
  2.7
 0,45
 0.30
 T2000
 T3610C
  16
 -10
 16,2
5/8
  23,4
 0.92
 250
 3625
 1000
 14500
75
  3.0
 0,61
 0.41
 T2000
 T3612C
  19
 -12
 19,1
3/4
  27,6
 1.09
 250
 3625
 1000
 14500
90
  3.6
 0,78
 0.52
 T2000
 T3616C
    25
   -16
   25,4
  1
    35,2
   1.39
   250
   3625
   1000
   14500
  113
    4.4
   1,30
   0.87
   T2000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       64 RYCO QUALITY
   64   65   66   67   68