Page 67 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 67

     ISOBARIC BRAID
 T3600D
EXTRA ABRASION RESISTANT FRAS
COMPACT ISOBARIC HOSE 250 BAR / 3625 PSI
                                                                                                                        RECOMMENDED FOR:
High pressure hydraulic oil lines. Constant pressure (Isobaric) 250 bar / 3625 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid (-04 to -06 size) or two braids (-08 to -16 size) of high tensile wire.
COVER:
DIEHARDTM Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
Extremely Flexible. Minimum Bend Radius 25% less than published SAE 100R17 Minimum Bend Radius. Tested to 500,000 impulse cycles. Constant pressure 250 bar / 3625 psi in all sizes for easy system design and hose selection. Small bend radius and compact dimensions are advantages in installations.
FRAS - FLAME RESISTANCE AND ANTI-STATIC:
DIEHARDTM complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A.
Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 188 to 233. Assembly Instructions pages 478.
   T3600D – DIEHARD COMPACT ISOBARIC HOSE
                         PART NO
 HOSE SIZE
    NOMINAL HOSE ID
   NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
  AVERAGE WEIGHT
 COUPLING SERIES
  ONE PIECE
                 Hose
  DN
 Dash
mm
  inch
 mm
 inch
 bar
 psi
 bar
psi
  mm
 inch
 kg/m
 lb/ft
 NON-SKIVE
  T3604D
   6
  -04
 6,6
   1/4
  11,8
  0.46
  250
  3625
  1000
 14500
   38
  1.5
  0,16
  0.11
  T2000
 T3605D
  8
 -05
8,2
  5/16
 14,4
 0.57
 250
 3625
 1000
14500
  40
 1.6
 0,23
 0.15
 T2000
 T3606D
  10
 -06
9,8
  3/8
 15,6
 0.61
 250
 3625
 1000
14500
  49
 1.9
 0,27
 0.18
 T2000
 T3608D
  12
 -08
13,0
  1/2
 19,9
 0.78
 250
 3625
 1000
14500
  68
 2.7
 0,45
 0.30
 T2000
 T3610D
  16
 -10
16,2
  5/8
 23,4
 0.92
 250
 3625
 1000
14500
  75
 3.0
 0,61
 0.41
 T2000
 T3612D
  19
 -12
19,1
  3/4
 27,6
 1.09
 250
 3625
 1000
14500
  90
 3.6
 0,78
 0.52
 T2000
 T3616D
    25
   -16
  25,4
    1
   35,2
   1.39
   250
   3625
   1000
  14500
    115
   4.4
   1,30
   0.87
   T2000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       CONNECTING PARTNERSHIPS 65
TECHNICAL ADAPTORS COUPLINGS HOSE INTRODUCTION
   65   66   67   68   69