Page 68 - RHAU-MKT RYCO Product Technical Manual 2018-12-14 v1-9
P. 68

 HOSE
ISOBARIC BRAID
 T3600S
EXTREMELY ABRASION RESISTANT COMPACT ISOBARIC HOSE
250 BAR / 3625 PSI
                                                                                                                     RECOMMENDED FOR:
High pressure hydraulic oil lines. Constant pressure (Isobaric) 250 bar / 3625 psi in all sizes. Small bend radius and compact dimensions are advantages in installations.
PERFORMANCE:
Meets or Exceeds the Performance Requirements of: ISO 18752-BC.
TUBE:
Black, oil resistant synthetic rubber.
REINFORCEMENT:
One braid (-04 to -06 size) or two braids (-08 to -16 size) of high tensile wire.
COVER:
SLIDER Black, oil and extremely abrasion resistant synthetic rubber sheathed with a layer of extremely abrasion
resistant polyethylene. Flame Resistant, MSHA compliant. Highly visible layline branding for easy and permanent identification. No skiving required with T2000 Series Crimp Couplings.
FEATURES:
Extremely Flexible. Minimum Bend Radius 25% less than published SAE 100R17 Minimum Bend Radius. Tested to 500,000 impulse cycles. Constant pressure 250 bar / 3625 psi in all sizes for easy system design and hose selection.
Small bend radius and compact dimensions are advantages in installations.
MSHA - FLAME RESISTANCE:
SLIDER complies with Flame Resistant requirements
of Australian Standard AS 2660 and Methods of Test
AS 1180.10B. Meets Flame Resistant Designation
“U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE:
-40°C to +100°C (-40°F to +212°F).
For water, emulsions etc. see page 58.
WORKING PRESSURE:
Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).
THIRD PARTY APPROVALS:
ABS, DNV-GL, LR, MED, USCG, GOST-R, BV, RINA and KR.
COUPLINGS:
NON-SKIVE ONE-PIECE CRIMP
T2000 Series (sizes -04 to -16) pages 188 to 233. Assembly Instructions pages 478.
T3600S – SLIDER COMPACT ISOBARIC HOSE
                         PART NO
  HOSE SIZE
  NOMINAL HOSE ID
    NOMINAL HOSE OD
 MAXIMUM WORKING PRESSURE
 MINIMUM BURST PRESSURE
  MINIMUM BEND RADIUS
  AVERAGE WEIGHT
 COUPLING SERIES
  ONE PIECE
                 Hose
  DN
 Dash
 mm
inch
  mm
 inch
 bar
 psi
 bar
 psi
mm
  inch
 kg/m
 lb/ft
 NON-SKIVE
  T3604S
   6
  -04
  6,6
 1/4
   11,8
  0.46
  250
  3625
  1000
  14500
 38
   1.5
  0,16
  0.11
  T2000
 T3605S
  8
 -05
 8,2
5/16
  14,4
 0.57
 250
 3625
 1000
 14500
40
  1.6
 0,23
 0.15
 T2000
 T3606S
  10
 -06
 9,8
3/8
  15,6
 0.61
 250
 3625
 1000
 14500
49
  1.9
 0,27
 0.18
 T2000
 T3608S
  12
 -08
 13,0
1/2
  19,9
 0.78
 250
 3625
 1000
 14500
68
  2.7
 0,45
 0.30
 T2000
 T3610S
  16
 -10
 16,2
5/8
  23,4
 0.92
 250
 3625
 1000
 14500
75
  3.0
 0,61
 0.41
 T2000
 T3612S
  19
 -12
 19,1
3/4
  27,6
 1.09
 250
 3625
 1000
 14500
90
  3.6
 0,78
 0.52
 T2000
 T3616S
    25
   -16
   25,4
  1
    35,2
   1.39
   250
   3625
   1000
   14500
  113
    4.4
   1,30
   0.87
   T2000
    Refer to the latest RYCO Crimp Charts for crimp diameter and mark lengths.
       66 RYCO QUALITY
   66   67   68   69   70